Microsoft 70-740 Test Prep 2021

NEW QUESTION 1
You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2021. Each server has a single 4-TB SATA hard disk.
To each server you attach a new 4-TB SATA hard disk.
You need to create a new storage cluster that uses Storage Spaces Direct. The storage pool must contain all of the new disks.
Which command should you run before you enable Storage Space Direct?

• A. Add-ClusterSharedVolume –Name “Disk 1” –Cluster Cluster1
• B. New-Cluster –Name Cluster1 –Node ‘Server1’, ‘Server2’, ‘Server3’, ‘Server4’ -NoStorage
• C. Get-ClusterAvailableDisk –Cluster Cluster1 | Add-ClusterDisk
• D. New-ClusterStorageEnclosure –id 1 –name Cluster1 –type jbod –ConnectionString “Server1,Server2,Server3,Server4”

Answer: B

NEW QUESTION 2
In this section, you'll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it As a result. these questions will not appear in the review screen
Note This question is part of a series of questions that present the same scenario Each question in the series contains a unique solution Determine whether the solution meets the stated goals.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2021 All domain controllers run Windows Server 2012 R2
Contoso com has the following configuration

You plan to deploy an Active Directory Federation Services (AD FS) farm on Served and to configure device registration You need to configure Active Directory to support the planned deployment. Solution You upgrade a domain controller to Windows Server 2021 Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 3
You have two servers named Server1 and Server2 that run Windows Server 2021.
You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2. You need to ensure that the replication traffic between the servers is limited to a maximum of 100
Mbps.
Which cmdlet should you run?

• A. New-NetQosPolicy
• B. Set-NetworkController
• C. New-NetTransportFilter
• D. New-StorageQosPolicy
• E. Set-NetTCPSetting
• F. Set-NetUDPSetting

Answer: A

Explanation: References: https://docs.microsoft.com/en-us/powershell/module/netqos/new-netqospolicy?view=win10-ps

NEW QUESTION 4
Your network contains three Hyper-V hosts. You add all of the hosts to a cluster.
You need to create highly available storage spaces that connect to directly attached storage on the hosts.
Which cmdlet should you use?

• A. Enable-CluslerStorageSpacesDircct
• B. Update-CluslerVirtualMachineConfiguration
• C. Add-CluslerDisk
• D. Set-Storage Pool

Answer: A

NEW QUESTION 5
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a two-node Hyper-V cluster named Cluster1 at a primary location and a stand-alone Hyper- V host named Server1 at a secondary location
A virtual machine named VM1 runs on Cluster1 You configure a Hyper-V Replica of VM1 to Server1 You need to perform a Test Fai lover of VM1. Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management console
• D. the configurehyperv.exe command
• E. the Disk Management console
• F. the Failover Cluster Manager console
• G. the Hyper-V Manager console
• H. the Server Manager Desktop app

Answer: G

NEW QUESTION 6
DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021.
Server1 allows inbound connectivity from all computers in the contoso.com domain. Server1 has an IP address of 192.168.0.10.
Server1 hosts a Windows container named Container1. Container1 hosts a website that is accessible on port 80.
You need to ensure that you can use the Docker client to manage Container1 from any computer in the domain.
Which three cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

Answer:

Explanation: References:
https://glennsarti.github.io/blog/getting-started-with-windows-containers/ https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage-containers/container-networking

NEW QUESTION 7
HOTSPOT
You have two servers named Server1 and Server2 that run Windows Server 2021. Server1 hosts two containers named Container1 and Container2.
The servers and the containers are configured as shown in the following table.

Container1 hosts a website on port 8080.
You create a port mapping between port 8080 on Container1 and port 80 on Server1.
Which URL can you use to access the website from Server1, Server2, and Container2? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 8
HOTSPOT
You have a Hyper-V host that runs Windows Server 2021 The Hyper-V host has a virtual machine named VM1
You have a VHD named VHD1 vhdx that has a generalized image of Windows Server 2021. You plan to create multiple virtual machines that will use the generalized image
You need to create differencing disks based on VHD1 vhdx
What command should you run? To answer, select the appropriate options in the answer area

Answer:

Explanation:

NEW QUESTION 9
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a Hyper-V host named Server1 that runs Windows Server 2021 and a two-node scale-out file server cluster named Cluster1
A virtual machine named VM1 runs on Server1
You need to migrate the storage on VM1 to Cluster1 Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management console
• D. the configurehyperv.exe command
• E. the Disk Management console
• F. the Failover Cluster Manager console
• G. the Hyper-V Manager console
• H. the Server Manager Desktop app

Answer: G

NEW QUESTION 10
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 hosts a virtual machine.
You need to provide VM1 with direct access to a graphics processing unit (GPU) on Server1. What should you do first?

• A. On VM1, install the QUzlity Windows Audio Video Experience (qWave) feature.
• B. Dismount the display adapter on Server1.
• C. In the settings of VM1, add a RemoteFX 3D Video Adapter.
• D. Disable the display adapter device on Server1.

Answer: D

Explanation: Before the physical device is allowed to be passed through to the VM, the device must be disabled on the host system. The physical device must be accessible/available exclusively to the VM only. References:
Introduction to Windows Server 2021 Hyper-V DiscreteDevice Assignment, page 5 https://lenovopress.com/lp0088.pdf

NEW QUESTION 11
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
Your network contains an Active Directory forest
You install Windows Server 2021 on 10 virtual machines.
You need to deploy the Web Server (IIS) server role identically to the virtual machines.
Solution: From a Group policy object (GPO), you create an application control policy, and then you apply the policy to the virtual machines.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 12
You have a server that runs Windows Server 2021.
The server contains a storage pool named Pool! Pool1 contains five physical disks named Disk1, Disk2, Disk3, Disk4, and Disk5.
A virtual disk named VirtualDisk1 is stored in pool1. VirtualDisk1 uses the panty storage layout Disk3 fails.
You need to remove Disk3 from Pool1.
Which two commands should you run? Each correct answer presents part of the solution.

• A. Update-StoragePool –FriendlyName Pool1
• B. Set-ResiliencySetting –StoragePool Pool1 –PhysicalDiskRedundancyDefault 4
• C. Reset-PhysicalDisk –FriendlyName Disk3
• D. Set-PhysicalDisk –FriendlyName Disk3 –Usage Retired
• E. Remove-PhysicalDisk –FriendlyName Disk3

Answer: BE

NEW QUESTION 13
Which container type is described below:
Provides application isolation through process and namespace isolation technology.
This container shares a kernel with the container host and all containers running on the host.

• A. Hyper-V Container
• B. Windows Server Container

Answer: B

NEW QUESTION 14
HOTSPOT
You have a Hyper-V host named Serverl that runs Windows Server 2021 Datacenter. Serverl is activated.
On Server 1. you deploy a virtual machine named VM1 that has a Server Core installahon of Windows Server 2021 Standard.
You need to activate VMI try using Automatic Virtual Machine- Activation (AVMA).
Which command should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 15
When you create a new SET team, you must configure the following team properties: Member adapters and Load balancing mode.
Which Load balancing mode ensures that outbound loads are distributed based on a hash of the TCP Ports and IP addresses.
This mode also re-balances loads in real time so that a given outbound flow can move back and forth between SET team members.

• A. Dynamic
• B. Hyper-V Port

Answer: A

NEW QUESTION 16
Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host named Server1 that runs Windows Server 2021.
Server1 hosts four virtual machines that are members of the domain. The virtual machines are configured as shown in the following table.

Which virtual machines can you manage by using PowerShell Direct?

• A. VM1, VM2, and VM3
• B. VM1, VM2, and VM4
• C. only VM2
• D. only VM4

Answer: B

Explanation: To use PowerShell Direct, the host operating system must run at least Windows 10 or Windows Server 2021.
References: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/manage/manage-windows-virtual-machines-with-powershell-direct#whats-required-to-use- powershell-direct

NEW QUESTION 17
HOTSPOT
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
A company named Contoso, Ltd. has several servers that run Windows Server 2021. Contoso has a Hyper-V environment that uses failover clustering and Windows Server Update Services (WSUS). The environment contains several Windows containers and several virtual machines.
The WSUS deployment contains one upstream server that is located on the company’s perimeter network and several downstream servers located on the internal network. A firewall separates the upstream server from the downstream servers.
You plan to deploy a human resources application to a new server named HRServer5. HRServer5 contains a FAT32-formatted data volume.
The CIO of Contoso identifies the following requirements for the company’s IT department:
- Deploy a failover cluster to two new virtual machines.
- Store all application databases by using Encrypted File System (EFS).
- Ensure that each Windows container has a dedicated IP address assigned by a DHCP server.
- Produce a report that lists the processor time used by all of the processes on a server named Server1 for five hours.
- Encrypt all communication between the internal network and the perimeter network, including all WSUS communications.
- Automatically load balance the virtual machines hosted in the Hyper-V cluster when processor utilization exceeds 70 percent.
You need to create a Data Collector Set to meet the requirement for the processor time report.
What command should you run to create the Data Collector Set? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 18
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might
have more than one correct solution, white others might not have a correct solution. Your network contains an Active Directory forest
You install Windows Server 2021 on 10 virtual machines.
You need to deploy the Web Server (IIS) server role identically to the virtual machines.
Solution: From Windows System Image Manager, you create an answer file, you copy the file to C:Sysprep on each virtual machine, and then you run the Apply-Image cmdlet.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 19
You have a server named Server1 that runs Windows Server 2021.
Server1 has four SCSI disks and a storage pool named Pool1 that contains three disks. You create a virtual disk named Disk 1 that uses a mirrored layout.
You create a partition named Partition1 that uses all of the available space on Disk 1. You need to extend Partition1.
What should you do first?

• A. From Windows PowerShell, run the Resize-Partition cmdlet.
• B. From Disk Management, modify the properties of Partition1.
• C. From the Storage Pools page in Server Manager, extend a virtual disk.
• D. From Disk Management, extend a volume.

Answer: C

Explanation: References: https://charbelnemnom.com/2015/03/step-by-step-how-to-extend-and-resize-a-two- way-mirrored-storage-tiered-space-storagespaces-ws2012r2/