Microsoft 70-740 Exam Questions and Answers 2021

NEW QUESTION 1
DRAG DROP
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 hosts a virtual machine named VM1. VM1 runs Windows Server 2021. VM1 uses a VHD for storage.
The disk configuration of VM1 is shown in the exhibit. (Click the Exhibit button.)

You need to increase the size of volume D to 400 GB.
Which cmdlets should you run on Server1 and VM1? To answer, drag the appropriate cmdlets to the correct servers. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 2
You are configuring a Windows Server 2021 failover cluster in a workgroup.
Before installing one of the nodes, you run the ipconfig /all command and receive the following output

You need lo ensure that Server 1 can be added as a node in the cluster What should you do1?

• A. Assign a static IP address
• B. Change the Node Type to Broadcast
• C. Configure a DNS suffix
• D. Enable NetBIOS over TCP/IP

Answer: C

NEW QUESTION 3
You have two servers named Server1 and Server 2 that run Windows Server 2021.
Server 1 and Server 2 are nodes in a Network Load Balancing (NLB) cluster. The Web Sever server role is installed on each node.
Users report that when they submit web form data, sometimes the data is not stored, and they must full in the form again.
You need to resolve the issue. The solution must ensure that connections are load balanced between Server 1 Server 2.
What should you do in the NLB cluster?

• A. Modify the existing port rules.
• B. Modify the Cluster operation mode.
• C. Add the Microsoft Load Balancing/Failover Provider service to all of the network adapters.
• D. Add an IP address.

Answer: B

NEW QUESTION 4
You have a server named Server1 that runs Windows Server 2021. Server1 is a member of contoso.com. Server1 has the Hyper-V role installed. Virtual machines on Server1 are connected to an external switch named Switch1.
You create a virtual machine named VM1 on Server1 by running the following cmdlets.

You need to ensure that you can install the operating system on VM1 by using Windows Deployment Services.
What should you do?

• A. Modify the SwitchType parameter of Switch1.
• B. Modify the DefaultFlowMinimumBandwidthWeight parameter of Switch1.
• C. Add a SCSI controller to VM1.
• D. Add a legacy network adapter to VM1.

Answer: D

NEW QUESTION 5
HOTSPOT
Your network contains an Active Directory forest The forest contains one domain named contoso.com. The domain contains two domain controllers named DC1 and DC2. DC1 holds all of the operations master roles.
During normal network operations, you run the following commands on DC2:
Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole PDCEmulator Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole RIDMaster DC1 fails.
You remove DC1 from the network, and then you run the following command:
Move-ADDirectoryServerOperationMasterRole -Identity "DC2" -OperationMasterRole SchemaMaster For each of the following statements, select Yes if the statement is true. Otherwise, select No

Answer:

Explanation:

NEW QUESTION 6
You have a server named Server 1 thai runs Windows Server 2021.
Server 1 has Internet connectivity You have a Nano Server image.
You need to download and save a Nano Server package in the Nano Server image. The package is NOT included in the Windows Server 2021 installation media.
Which two cmdlets should you run on Server1.

• A. Set-PackageSource
• B. Install-PackageProvider
• C. Add-AppxProvisionedPackage
• D. Save-NanoServerPackage
• E. Add-WindowsPackage

Answer: BD

NEW QUESTION 7
DRAG DROP
Your network contains an Active Directory domain named contoso.com. The domain has two clusters named FC1 and FC2.
The domain contains servers that run Windows Server 2021. The Servers are configured as shown in the following table.

Server1 hosts a highly available virtual machine named VM1.
You need to move VM1 from Server1 to Server3 by using live migration.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation: References: http://www.checkyourlogs.net/?p=16401

NEW QUESTION 8
You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2021.
Server1 and Server2 have the Hyper-V server role installed. Server1 hosts a virtual machine named VM1. Server2 hosts a virtual machine named VM2. Server3 hosts the disks and the configurations of both virtual machines on an SMB share named VMShare.
You use Server4 to manage Hyper-V operations on Server1 and Server2.
From Server4, you attempt to perform a live migration of VM1 and VM2, but you receive the following error message: “No credentials are available in the security package”.
You need to ensure that you can perform the live migration of VM1 and VM2 between Server1 and Server2 while signed in to Server4.
What should you do?

• A. From Active Directory Users and Computers, modify the properties of Server4. Configure the delegation settings to trust the computer for delegation of cifs.
• B. From Windows PowerShell on Server3, run the remove-SMBMultiChannelConstraint cmdlet, and then assign Server4 Full Control permissions to VMShare.
• C. From Active Directory Users and Computers, modify the properties of Server1 and Server2. Configure the Delegation settings to trust the computers for delegation of the Microsoft Virtual System Migration Service.
• D. From Active Directory Users and Computers, modify the properties of your user accoun
• E. Modify the Account is sensitive and cannot be delegated setting.

Answer: C

Explanation: References: https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/deploy/set- up-hosts-for-live-migration-without-failover-clustering

NEW QUESTION 9
Note This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a server administrator at a company named Contoso, Ltd.
Contoso has a Windows Server 2021 Hyper-V environment configured as shown in the following table.

All of the virtual switches are of the external type.
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
Solution: You implement live migration by using Host1 and Host2. Does this meet the goat?

• A. Yes
• B. No

Answer: B

NEW QUESTION 10
DRAG DROP
You are planning the configuration of a virtual network switch for a Hyper-V environment. The environment will contain the following Hyper-V hosts:
- A server named Server1 will have 10 virtual machines that must be able to communicate with each other. The virtual machines must be prevented from communicating with Server1 and all other servers on the corporate network.
- A two-code failover cluster named Cluster1 will have 20 virtual machines. The virtual machines will
run on both nodes. Hyper-V hosts on the corporate network must be able to connect to the virtual machines.
Which type of virtual switch should you select for each Hyper-V host? To answer, drag the appropriate virtual switch types to the correct hosts. Each virtual switch type must be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Answer:

Explanation:

NEW QUESTION 11
DRAG DROP
You have a Hyper-V host named Server1 that runs Windows Server 2021.
The installation source files for Windows Server 2021 are located in D:Source. You need to create a Nano Server image.
Which cmdlets should you run? To answer, drag the appropriate cmdlets to the correct targets. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bat between panes or scroll to view content.

Answer:

Explanation:
Step 1: Import Module
Import-Module .NanoServerImageGenerator.psm1 Step 2: New New-NanoServerImage
Create Nano Server Image VHDX
New-NanoServerImage -MediaPath .Files -BasePath.Base -TargetPath .ImagesNanoVMGA.vhdx References: https://technet.microsoft.com/en-us/windows-server-docs/get-started/deploy-nano- server

NEW QUESTION 12
HOTSPOT
Your network contains an Active Directory domain named contoso com The domain contains tour servers named Server 1. Server2. Server3. and Server4 that run Windows Server 2021
Server 1 and Server2 are nodes in Hyper-V cluster named Cluster1 You have a highly available virtual machine named VM1
Server1 is the owner node of VM1 Server3and Server4 are nodes of a scale-out file server named Cluster2,
The storage on Server1 is configured as shown in the following table

You need to move the virtual disk of VM1 to a different location
What should you do? To answer, select the appropriate options in the answer area

Answer:

Explanation:

NEW QUESTION 13
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1
must resolve queries from all other DNS clients Solution From a Group Policy object (GPO) in the domain, you modify the Network List Manager Policies Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 14
You have a server named Server1 that runs Windows Server 2021. Windows Defender is enabled on Server1.
Server1 runs an application named App1 that stores various types of files in Microsoft OneDrive for Business, MicrosoftOneDrive, and Microsoft SharePoint Online. App1 also interacts with several local services.
You need to prevent Windows Defender from scanning any files opened by App1. What should you do on Server1?

• A. Run the Set-ExecutionPolicy cmdlet.
• B. Run the New-AppLockerPolicy cmdlet.
• C. Modify the real-time protection settings in Windows Defender.
• D. Run the Add-MpPreference cmdlet.

Answer: D

Explanation:
References:
https://docs.microsoft.com/en-us/windows/security/threat-protection/windows-defender-antivirus/configure-proc

NEW QUESTION 15
You deploy a Hyper-V server named Served in an isolated test environment The test environment is prevented from accessing the Internet Server1 runs the Datacenter edition of Windows Server 2021. You plan to deploy the following guest virtual machines on the server

Which activation model should you use for the virtual machines'?

• A. Multiple Activation Key (MAK)
• B. Automatic Virtual Machine Activation (AVMA)
• C. Original Equipment Manufacturer (OEM) key
• D. Key Management Service (KMS)

Answer: B

NEW QUESTION 16
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021.
You plan to use Windows Server Backup to back up all of the data on Server1. You create a new volume on Server1.
You need to ensure that the new volume can be used as a backup target. The backup target must support incremental backups.
Solution: You mount the volume to C:Backup, and you format the volume by using NTFS. Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 17
You have an application named App1 App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment You need to ensure that the traffic is distributed evenly among the virtual machines that host App1 What should you include in the environment?

• A. Network Controller and Windows Server Network Load Balancing (NLB) nodes
• B. Network Controller and Windows Server Software Load Balancing (SLB) nodes
• C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
• D. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes

Answer: D

NEW QUESTION 18
You have a Network Load Balancing (NLB) cluster that contains two nodes named Server1 and Server2. The nodes run Windows Server 2021.
The NLB cluster has the following configuration.

You deploy the Web Server (IIS) server role identically to both servers.
You need to configure NLB to load balance requests between the web servers. HTTP requests must be stateless. HTTPS requests must be stateful.
What should you do? Each correct answer presents part of the solution.

• A. Modify the Cluster operation mode.
• B. Suspend the cluster.
• C. Drainstop the cluster.
• D. Add a new port rule.
• E. Edit the existing port rule.

Answer: CD

Explanation:
References:
https://www.ntweekly.com/2021/09/04/failover-nlb-cluster-host-member/ https://docs.microsoft.com/en-us/windows-server/networking/technologies/network-load-balancing

NEW QUESTION 19
HOTSPOT
You have a Hyper-V host named Server1 that runs Windows Server 2021 datacenter. Server1 is activated.
On Server1, you deploy a virtual machine named VM1 that has a Server Core installation of Windows Server 2021 Standard.
You need to activate VM1 by using Automatic Virtual Machine Activation (AVMA).
Which command should you run? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Answer:

Explanation: References: https://blogs.technet.microsoft.com/askcore/2013/11/13/activating-virtual-machines- via-automatic-virtual-machine-activation-in-windows-server-2012-r2/