Actual 70-740 Exam Questions and Answers 2021

NEW QUESTION 1
You have two servers named Server1 and Server2 that run Windows Server 2021.
You plan to implement Storage Replica to replicate the contents of volumes on Server1 to Server2. You need to ensure that the replication traffic between the servers is limited to a maximum of 100 Mbps.
Which cmdlet should you run?

• A. New-NetQosPolicy
• B. Set-NetworkController
• C. New-NetTransportFilter
• D. New-StorageQosPolicy

Answer: A

Explanation:
References: https://technet.microsoft.com/en-us/library/hh967471(v=wps.630).aspx

NEW QUESTION 2
Your network contains an Active Directory forest named contoso com The forest contains a member server named Server1 that runs Windows Server 2021 Server1 is located in the perimeter network You install the Active Directory Federation Services server role on Server1. You create an Active Directory Federation Services (ADFS) farm by using a certificate that has a subject name of sts.contoso com
You need to enable certificate authentication from the Internet on Server1
Which two inbound TCP ports should you open on the firewall? Each correct answer presents part of the solution

• A. 389
• B. 443
• C. 3389
• D. 8531
• E. 49443

Answer: BE

NEW QUESTION 3
You have Hyper-V virtual machines that run 50 web servers, 10 Microsoft SQL Server servers. 10 file servers, and eight domain controllers.
You need to implement a backup strategy that meets the following requirements:
*Backs up all servers
*Centralizes backup management
*Performs application-level backups
*Provides the ability to perform bare metal recovery What should you use?

• A. Microsoft Azure VM Backup
• B. Microsoft Azure Backup Agent
• C. Windows Server Backup
• D. Microsoft Azure Backup Server

Answer: D

NEW QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in
the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
You have a server named Server1 that runs Windows Server 2021. Server1 hosts a line-of-business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.
You need to log an event in the Application event log whenever App1 consume more than 4 GB of memory.
Solution: You create a performance counter data collector. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 5
You have two servers that run Windows Server 2021. The servers are configured as shown in the following table.

You need to create a failover cluster that contains both servers.
Which two commands should you run? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

• A. wmic ComputerSystem Set Workgroup= “Workgroup2”
• B. New-Cluster-Name Cluster1- Node Server1, Server2- AdministrativeAccessPoint DNS
• C. New-Cluster-Name Cluster1- Node Server1, Server2- AdministrativeAccessPoint ActiveDirectoryAndDns
• D. New-Cluster-Name Cluster1- Node Server1, Server2- AdministrativeAccessPoint None
• E. netdom computername Server1/MakePrimary:server1.contoso.com

Answer: AB

NEW QUESTION 6
You have a Windows Server 2021 failover Cluster named Cluster 1 that contains four nodes named Server1 Server2, Server3, and Serve4.
You need to configure Cluster to use directly attached storage to store several virtual machines. You run the Enable-ClusterStorageSpacesDirect cmdlet on Server1.
What should you do next?

• A. Run the Enable-ClusterStorageSpacesDirect cmdlet on the other three nodes.
• B. Create volumes.
• C. Create storage pool.
• D. Add-ClustcrResource mdlet on all of the nodes.

Answer: B

Explanation: References:
https://medium.com/beyond-the-helpdesk/setting-up-and-configuring-storage-spaces-direct-in-windows-server-2021-4d2be85a8f7d

NEW QUESTION 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com.
You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The Windows Server 2021 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage –Edition Datacenter –DeploymentType Host –Package Microsoft- NanoServer-Compute-Package -MediaPath ‘D:’ –TargetPath C:Nano1Nano1.wim –ComputerName Nano1 –DomainName Contoso.com
Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 8
HOTSPOT
Your network contains an Active Directory domain named contoso com. The domain contains a DNS server named Server1
You enable Response Rate Limiting on Server1.
You need to prevent Response Rate Limiting from applying to hosts that reside on the network of 10.0.0.0/24.
Which cmdlets should you run? To answer, select the appropriate options in the answer area

Answer:

Explanation:

NEW QUESTION 9
Which terminology is being described below?
Time synchronization is critical for the proper operation of many Windows services and line- ofbusiness applications. The uses the Network Time Protocol (NTP) to synchronize computer clocks on the network so that an accurate clock value, or time stamp, can be assigned to network validation requests and resource access requests.

• A. Network Services Shell (Netsh)
• B. Listsvc
• C. Fixmbr
• D. Windows Time service (W32time)

Answer: D

Explanation: The correct answer is Windows Time service (W32time)

NEW QUESTION 10
You have a Windows Server 2021 failover cluster 1 that contains four nodes named Server1, Server2, Server3, Server4, Cluster1 hosts 40 virtual machines that are distributed evenly across the nodes. Server1 and Server2 are located in a data center in Madrid. Server3 and Server4 are located in a data center in Barcelona.
You need to ensure that when you pause a node in the other data center.
Which two actions should you perform? Each correct answer present part of the solution.

• A. Run the New-Cluster Fault Domain cmdlet.
• B. Run the Add-Cluster Group cmdlet.
• C. Configure a file share witness for each data center.
• D. Run the Set-Cluster Fault Domain cmdlet.
• E. Create an Active Directory site for each data center.
• F. Change the quorum configuration of the cluster to Node Majority.

Answer: BD

NEW QUESTION 11
HOTSPOT
You have a machine named VM1 that runs Windows Server 2021 VM1 is a Remote Desktop Services (RDS) server.
You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network.
Which command should you run on the Hyper-V host? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 12
You have a Hyper-V host that runs Windows Server 2021.
You need to identify the amount of processor resources consumed by Hyper-V and virtual machines. Which counter should you use from Performance Monitor?

• A. Hyper-V HypervisorLogical Processor
• B. Hyper-V Hypervisor Root Virtual Processor(_Total)% Guest Run Time
• C. Hyper-V Hypervisor Virtual Processor(_Total)% Hypervisor Run Time
• D. Hyper-V Hypervisor Virtual Processor(_Total)% Total Run Time
• E. Hyper-V Hypervisor Logical Processor(_Total)% Total Run Time

Answer: A

Explanation: References:
https://msdn.microsoft.com/en-us/library/cc768535(v=bts.10).aspx

NEW QUESTION 13
You need to modify the GPO prefix by IPAM. What should you do?

• A. Run theSet-lpamConfigurationcmdlet
• B. ClickProvision the IPAM serverin Server Manager.
• C. ClickConfigure server discoveryin Server Manage
• D. Run thelnvoke-lpamGpoProvisioningcmdlet

Answer: A

NEW QUESTION 14
HOTSPOT
You have a four-node Hyper-V cluster named Cluster1.
A virtual machine named VM1 runs on Cluster1. VM1 has a network adapter that connects to a
virtual switch named Network1.
You need to prevent a network disconnection on VM1 from causing VM1 to move to another cluster node.
What command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 15
You have a Windows Server 2021 failover cluster that contains two servers named Server1 and Server2.
The Cluster Service on Server1 fails.
You need to identify the cause of the failure. What should you do?

• A. From Windows PowerShell, run the Get-ClusterNode cmdlet.
• B. From Event Viewer, review the Application event log.
• C. From Windows PowerShell, run the Get-ClusterLog cmdlet.
• D. From Event Viewer, review the System event log.

Answer: C

Explanation: References: https://blogs.msdn.microsoft.com/clustering/2015/05/14/windows-server-2021- failover-cluster-troubleshooting-enhancements-cluster-log/

NEW QUESTION 16
In this section, you'll see one or more sets of questions with the same scenario and problem Each
question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4 Server1
must resolve queries from all other DNS clients
Solution From Windows PowerShell on Setver1, you run the Add-DnsServerTrustAnchor cmdtel Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 17
You have a Windows Server 2021 Hyper-V failover cluster that contains two nodes named Node1 and Node2
On Node1, you create a virtual machine named VM01 by using Hyper-V Manage.
You need to configure VM01 to move to Node2 automatically if Node1 becomes unavailable What should you do?

• A. From Failover Cluster manager, run the configure Role actions.
• B. From Hyper-V Manager, click VM01 and click Enable Replication.
• C. From Hyper-V Manager Click Node 1 and the modify the hyper-V settings.
• D. From Windows Powershell, run the Enable-VMReplication cmdlet.

Answer: A

Explanation:
http://windowsitpro.com/hyper-v/make-vm-highly-available-windows-server-2012

NEW QUESTION 18
HOTSPOT
You network contains an Active Directory named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.
The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1.
Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click the Exhibit button.)

The DHCP scopes are configured as shown in the Scopes Exhibit. (Click the Exhibit button.)

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Answer:

Explanation:
https://technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx

NEW QUESTION 19
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2021 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.

The virtual machines are configured as follows:
• Each virtual machine has one virtual network adapter.
• VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.
• All of the servers on the network can communicate with all of the virtual machines. End of repeated scenario.
You create a new NLB cluster that contains VM3.
You need to ensure that VM2 can remain in the original cluster and be added to the new cluster. What should you do first?

• A. Add a new virtual network adapter to VM2.
• B. Install the Web Application Proxy server role on VM2 and VM3.
• C. Modify the default port rule.
• D. Change the cluster operation mode.

Answer: A