VMware 2V0-622D Dumps Questions 2021

NEW QUESTION 1
An administrator is creating a hybrid vSAN cluster with six ESXi hosts equally distributed on three server racks.
How can this cluster be protected from a single rack failure?

• A. Allocate at least two storage controllers in each host.
• B. Create at list two disk groups in each host.
• C. Allocate at least two flash devices for caching in each disk group.
• D. Create three fault domains in the vSAN cluster.

Answer: D

NEW QUESTION 2
Which two components are necessary for the first boot of a host using Auto Deploy? (Choose two.)

• A. Host Profiles
• B. Bulk licensing
• C. vSphere Authentication Proxy
• D. TFTP
• E. DHCP

Answer: DE

NEW QUESTION 3
DRS is set to Fully-Automated mode and seems to be migrating virtual machines too frequently. Which action can potentially decrease the amount of automated migrations performed by DRS?

• A. Increase the Migration Threshold by moving the slider to the right.
• B. Decrease the Migration Threshold by moving the slider to the left.
• C. Set DRS to Partially-Automated mode.
• D. Enable EVC for the cluster.

Answer: B

NEW QUESTION 4
Which are the three supported backup types for the vCenter Server Appliance 6.5? (Choose three.)

• A. File-Based Backup
• B. vSphere Storage APIs-Data Protection
• C. Replication
• D. Snapshots
• E. vSphere Data Protection

Answer: ABE

NEW QUESTION 5
An administrator has decided to use Auto Deploy in the environment.
Which two considerations must be taken into account before configuring Auto Deploy? (Choose two.)

• A. Hosts in a cluster must be connected to a Distributed Switch.
• B. Host profiles are not supported when using Auto Deploy.
• C. DHCP must be configured to support PXE boot.
• D. Storage DRS must be enabled.
• E. A TFTP server must be setup and running.

Answer: CE

NEW QUESTION 6
A domain user is able to successfully log into the vSphere Web Client, but notices that the vCenter Server system does not appear in the inventory.
Which is the cause of this situation?

• A. The Service Control Agent service is not running.
• B. The vCenter Server does not have any hosts added to inventory yet.
• C. The domain user has read-only permissions on vCenter Server.
• D. The domain user does not have vCenter Server permissions.

Answer: D

Explanation: The vCenter Server system will not appear in the inventory if you do not have permissions on it. For example, if you log in as the vCenter Single Sign On administrator user, you might not have permissions on any vCenter Server system.

NEW QUESTION 7
A vSphere Administrator observes that the Primary VM configured with Fault Tolerance is executing slowly. After further investigation, it is determined that the Secondary VM is on an overcommitted ESXi host.
What two methods will correct the problem? (Choose two.)

• A. Configure a CPU limit on the Primary VM which will also apply to the Secondary VM.
• B. Turn off and turn on FT in order to recreate the Secondary VM on a different datastore.
• C. Use Storage vMotion to migrate the Secondary VM to another datastore.
• D. Use vMotion to migrate the Secondary VM to a different ESXi host.

Answer: BD

NEW QUESTION 8
Bydefault, how often is the vCenter vpx user password automatically changed?

• A. 15 days
• B. 45 days
• C. 60 days
• D. 30 days

Answer: D

Explanation: vCenter Server creates the vpxuser account on each ESX/ESXi host that it manages. The password for each vpxuser account is auto-generated when an ESX/ESXi host is added. The password is updated by default every 30 days.

NEW QUESTION 9
What advanced parameter defines a custom isolation IP address for a vSphere HA cluster?

• A. das.isolationaddress
• B. das.usedefaultisolationaddress
• C. das.isolationshutdowntimeout
• D. fdm.isolationpolicydelaysec

Answer: A

NEW QUESTION 10
Which three statements are correct regarding booting an ESXi Host from Fibre Giannel SAN? (Oioose three.)

• A. Direct connect topology is supported.
• B. Multipathing to a boot LUN on an active-passive array is supported.
• C. ESXi hosts do not require local storage.
• D. Each host must have its own boot LUN.
• E. Hosts can share one common boot LUN.

Answer: ACD

Explanation: https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.storage.doc/GUID- 8FAD881D-7A00-43C9-AB69-66DC7816968C.html
When you use boot from SAN with multiple ESXi hosts, each host must have its own boot LUN.If you configure multiple hosts to share the same boot LUN, ESXi image corruption is likely to occur.Multipathing to a boot LUN on active-passive arrays is not supported because the BIOS does not support multipathing and is unable to activate a standby path.
The correct answers are:- ABCDirect connect topology is supported. Each host must have its own boot LUN.
ESXi hosts do not require local storage.

NEW QUESTION 11
Which three design requirements must be satisfied to enable RAID-6 objects in a VMware vSAN cluster? (Choose three.)

• A. deduplication and compression
• B. at least six hosts contributing storage
• C. vSAN Advanced license or higher
• D. vSAN stretched cluster
• E. All Flash configuration

Answer: BCE

Explanation: https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.virtualsan.doc/GUID-AD408FA8-5898
https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.virtualsan.doc/GUID-ED76D553-0AB https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.virtualsan.doc/GUID-6D818555-8DE8

NEW QUESTION 12
An administrator is using virtual machine encryption in their vSphere 6.5 environment. The Key Management Server (KMS) has experienced a critical failure.
Which two statements are true about VM encryption when the KMS is not available? (Choose two.)

• A. VMs will shut down gracefully in the event of a KMS outage as a proactive measure to prevent data theft.
• B. VMs which were running at the time of the KMS failure will continue to run.
• C. If an ESXi host is rebooted, it will be unable to power on encrypted VMs until KMS connectivity is restored.
• D. vCenter Server will continue to distribute encryption keys as long as it is not rebooted while the KMS is unreachable.
• E. ESXi hosts within the same cluster will share keys with one another while the KMS is unreachable.

Answer: BC

Explanation: If the KMS is unreachable, the VMs running at the time of KMS failure will continue to run. Another fact is if an ESXi host is rebooted, it will not power on encrypted VMs until KMs connectivity is fully restored.

NEW QUESTION 13
What two enhancements are in VMFS6 but not in VMFS5? (Choose two.)

• A. Support for 4k native disks
• B. Support for 512e disks
• C. GPT storage device partitioning
• D. Automatic space reclamation

Answer: BD

Explanation: http://virtualization24x7.blogspot.com/2021/01/vmfs5-vs-vmfs6.html?utm_source=feedburner
&utm_medium=feed&utm_campaign=Feed%3A+Virtualization24x7+%28Virtualization24x7%29

NEW QUESTION 14
A vSphere Administrator has VM Component Protection (VMCP) enabled, but the VM was not restarted when one of the VMFS datastores experienced an All Paths Down (APD) failure.
What two scenarios would explain why the virtual machine was not restarted? (Choose two.)

• A. Insufficient Capacity is available on the failover ESXi hosts.
• B. VM Monitoring is required in order for VMCP to failover during an APD event.
• C. VMware Tools is not installed on the guest operating system for the VM.
• D. The APD failure was corrected before the VM could be restarted.

Answer: AD

NEW QUESTION 15
A vSphere Administrator must ensure that when vSphere HA is triggered, the virtual machines are restarted by priority.
What four VMrestart priorities are available? (Choose four.)

• A. Medium
• B. Low
• C. Conservative
• D. High
• E. Disabled
• F. Aggressive

Answer: ABDE

Explanation: The values for this setting are Disabled, Low, Medium (the default), and High. The Disabled setting is ignored by the vSphere HA VM/Application monitoring feature because this feature protects virtual machines against operating system-level failures and not virtual machine failures. When an operating system-level failure occurs, the operating system is rebooted by vSphere HA, and the virtual machine is left running on the same host. You can change this setting for individual virtual machines.
https://docs.vmware.com/en/VMware-vSphere/6.0/vsphere-esxi-vcenter-server-601-availability-guide.pdf

NEW QUESTION 16
What are limits of vCenter Libraries in vSphere 6.5?

• A. Total items 2000, Biggest item size 1TB, total libraries per VC 1000, total items per library 1000 and max number of syncs 16
• B. Total items 4000, Biggest item size 512TB, total libraries per VC 2000, total items per library 2000 and max number of syncs 24
• C. Total items 1000, Biggest item size 1TB, total libraries per VC 1000, total items per library 1000 and max number of syncs 16
• D. Total items 2000, Biggest item size 1TB, total libraries per VC 1000, total items per library 1000 and max number of syncs 32

Answer: A