Real 200-355 Dumps 2021

Want to know ccna wireless 200 355 features? Want to lear more about cisco 200 355 experience? Study ccna wireless 200 355. Gat a success with an absolute guarantee to pass Cisco 200-355 (Implementing Cisco Wireless Network Fundamentals) test on your first attempt.

Online 200-355 free questions and answers of New Version:

NEW QUESTION 1
What are three primary components that describe TKIP? (Choose three.)

  • A. broadcast key rotation
  • B. dynamic WEP
  • C. message integrity check
  • D. per-packet key hashing
  • E. symmetric key cipher
  • F. WPA2 enterprise mode

Answer: ACD

NEW QUESTION 2
The new tablets for the sales department require an SNR of 18 or more to operate. Given a noise floor of -88 dBm, what is the minimum RSSI that is needed?

  • A. -60 dBm
  • B. -70 dBm
  • C. -72 dBm
  • D. -80 dBm
  • E. -96 dBm
  • F. -106 dBm

Answer: B

NEW QUESTION 3
To implement a more secure means of communication for voice and data, what technology successfully resists interference by utilizing a wider bandwidth than needed for the transmitting signal?

  • A. Spread Spectrum
  • B. Microwave
  • C. Extended U-NII2
  • D. ISM Bands

Answer: A

NEW QUESTION 4
Which EAP protocol requires a certificate only on the server side?

  • A. EAP-PEAP
  • B. EAP-FAST
  • C. EAP-TLS
  • D. EAP-SSL

Answer: A

NEW QUESTION 5
When a wireless guest network is implemented using auto-anchor mobility in a controller-based wireless network, which controller is responsible for a guest client's IP address and their security configuration?

  • A. any controller that supports the same VLAN
  • B. foreign controller
  • C. anchor controller
  • D. master controller
  • E. RF group master controller

Answer: C

NEW QUESTION 6
Access points must discover a wireless LAN controller before they can become an active part of the network. In which order does an access point try to discover a controller?

  • A. Layer 3 CAPWAP or LWAPP broadcast discovery DHCP option 43Locally stored controller IP address discovery DNS controller name resolution
  • B. Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery DNS controller name resolutionDHCP option 43
  • C. Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery DHCP option 43DNS controller name resolution
  • D. DNS controller name resolution DHCP option 43Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery

Answer: C

NEW QUESTION 7
A controller is connected to a Cisco catalyst switch. The switch port configuration looks like this:
200-355 dumps exhibit
Which controller CLI command assigns its management interface to the native VLAN interface of the CISCO catalyst switch?

  • A. Config interface vlan management 50
  • B. Config interface vlan management 1
  • C. Config interface vlan management 0
  • D. Config interface vlan management 30
  • E. Config interface vlan management 20

Answer: C

NEW QUESTION 8
A network engineer in the GUI of WCS version 7 wants to add an access point to a map. Where can this command be found within the drop-down menu?

  • A. Monitor > Maps
  • B. Reports > Maps
  • C. Monitor > Network Summary
  • D. Configure > Maps

Answer: A

NEW QUESTION 9
Refer to the exhibit.
200-355 dumps exhibit
Which action allows you to view a summary count by alarm types for the displayed total of 11 alarms?

  • A. Choose Monitor > Alarms
  • B. Click the Security tab
  • C. Click a respective number in the Alarm Summary
  • D. Click the Alarm Summary blue arrow
  • E. Choose Home (house icon) > Alarm Summary

Answer: D

NEW QUESTION 10
Which statement about ZigBee technology is true?

  • A. It has low power consumption.
  • B. It is designed only for point-to-point communications.
  • C. It ranges up to 250 meters.
  • D. It supports data rates up to 1 and 2 Mb/s.

Answer: A

NEW QUESTION 11
Drag the propagation behavior on the left to the corresponding environment on the right.
200-355 dumps exhibit

    Answer:

    Explanation: 200-355 dumps exhibit

    NEW QUESTION 12
    The results of a Cisco WCS client troubleshooting tool are summarized into a simple visual representation of a four-part progression of the connection status for a wireless client.
    What are the four parts? (Choose four.)

    • A. client MAC address
    • B. 802.11 authentication
    • C. IP address assignment
    • D. 802.11 association
    • E. successful association
    • F. authentication method
    • G. SSID
    • H. client radio type

    Answer: BCDE

    NEW QUESTION 13
    A network engineer is upgrading the WLC image through the GUI for maintenance. What three transfer methods are available? (Choose three.)

    • A. FTP
    • B. SNMP
    • C. TFTP
    • D. SFTP
    • E. HTTP
    • F. SMB
    • G. HTTPS
    • H. SCP

    Answer: ACD

    NEW QUESTION 14
    What are two security threats to wireless networks? (Choose two.)

    • A. ad-hoc networks
    • B. client misassociation
    • C. port redirection
    • D. cross-site scripting

    Answer: AB

    NEW QUESTION 15
    When using OFDM, how many subcarriers are devoted to carrying data?

    • A. 4
    • B. 12
    • C. 44
    • D. 48
    • E. 52

    Answer: D

    NEW QUESTION 16
    Which two attributes must be configured to match in order for WLCs to operate in the same mobility group? (Choose two.)

    • A. mobility domain name
    • B. virtual IP address
    • C. service interface address
    • D. hardware model
    • E. software version

    Answer: AB

    NEW QUESTION 17
    Which statement correctly describes the procedure for a lightweight AP to successfully establish a connection to a controller?

    • A. The AP authenticates the received Cisco WLC certificate as vali
    • B. The AP then sends its certificate to the controller.
    • C. The AP sends its certificate to the controlle
    • D. The AP then authenticates the received Cisco WLC certificate as valid.
    • E. The AP sends its certificate to the RADIUS serve
    • F. The AP then authenticates the controller certificate as valid.
    • G. The AP sends its certificate to the RADIUS serve
    • H. The AP then authenticates the RADIUS certificate as valid.
    • I. The AP authenticates the received RADIUS server certificate as vali
    • J. The AP then sends its certificate to the RADIUS server.
    • K. The AP authenticates the received RADIUS server certificate as vali
    • L. The AP then sends its certificate to the controller.

    Answer: B

    100% Valid and Newest Version 200-355 Questions & Answers shared by DumpSolutions, Get Full Dumps HERE: https://www.dumpsolutions.com/200-355-dumps/ (New 490 Q&As)