Most Up-to-date MS-721 Actual Test For Collaboration Communications Systems Engineer Certification

It is more faster and easier to pass the Microsoft MS-721 exam by using Tested Microsoft Collaboration Communications Systems Engineer questuins and answers. Immediate access to the Latest MS-721 Exam and find the same core area MS-721 questions with professionally verified answers, then PASS your exam with a high score now.

Online Microsoft MS-721 free dumps demo Below:

NEW QUESTION 1

You need to provision a Microsoft Teams-certified common area phone device at a field site. The solution must ensure that a standard user can complete the physical handset tasks without sharing credentials.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
MS-721 dumps exhibit


Solution:
Graphical user interface, text, table Description automatically generated with medium confidence
MS-721 dumps exhibit
Reference:
https://docs.microsoft.com/en-us/MicrosoftTeams/devices/remote-provision-remote-login

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 2

You have a Microsoft Teams Phone deployment that contains a Session Border Controller (SBC) named SBC1.contoso.com.
Direct Routing integrates with a PBX phone system that uses only four-digit dialing and is configured to use the SBC.
Teams is configured to use dial plans that normalize any four-digit calls to E.164. You have the following translation rule.
MS-721 dumps exhibit
You need to ensure that calls to the legacy PBX pass only a four-digit extension.
How should you complete the PowerShell command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
MS-721 dumps exhibit


Solution:
Box 1: Set CsOnlinePSTNGateway
* Set CsOnlinePSTNGateway
Modifies the previously defined Session Border Controller (SBC) Configuration that describes the settings for the peer entity. This cmdlet was introduced with Microsoft Phone System Direct Routing.
Syntax
Set-CsOnlinePSTNGateway [[-Identity] <string>]
[-BypassMode <string>]
[-Description <string>] [-Enabled <boolean>]
[-FailoverResponseCodes <string>] [-FailoverTimeSeconds <int>]
[-ForwardCallHistory <boolean>] [-ForwardPai <boolean>]
[-GatewayLbrEnabledUserOverride <boolean>] [-GatewaySiteId <string>]
[-GatewaySiteLbrEnabled <boolean>]
[-InboundPstnNumberTranslationRules <Object>]
[-InboundTeamsNumberTranslationRules <Object>] [-MaxConcurrentSessions <int>]
[-MediaBypass <boolean>]
[-MediaRelayRoutingLocationOverride <string>]
[-OutboundPstnNumberTranslationRules <Object>]
[-OutboundTeamsNumberTranslationRules <Object>] [-PidfLoSupported <boolean>]
[-ProxySbc <string>]
[-SendSipOptions <boolean>] [-SipSignalingPort <int>]
[-WhatIf] [-Confirm]
[<CommonParameters>]
Box 2: -OutboundPSTNNumberTranslationRules
Assigns an ordered list of Teams translation rules, that apply to PSTN number on outbound direction. Incorrect:
* -OutboundPSTNNumberTranslationRules
Assigns an ordered list of Teams translation rules, that apply to PSTN number on outbound direction.
* SET CsHybridPSTNApplience
Use the Set-CsHybridPSTNAppliance cmdlet to modify an existing Skype for Business Cloud Connector Edition appliance's attributes.
Note: This cmdlet will be deprecated from Teams PowerShell Module. Syntax:
Set-CsHybridPSTNAppliance
[-MaintenanceMode <Boolean>] [-MediationServerGruu <String>]
[-Identity] <XdsGlobalRelativeIdentity> [-Tenant <Guid>]
[-Force]
[-WhatIf] [-Confirm]
[<CommonParameters>]
* Set CsHybridPSTNSite
Use the Set-CsHybridPSTNSite cmdlet to modify an existing hybrid public switched telephone network (PSTN) site's attributes.
Note: This cmdlet will be deprecated from Teams PowerShell Module. Syntax
Set-CsHybridPSTNSite
[-Identity] <XdsGlobalRelativeIdentity> [-Tenant <Guid>]
[-EdgeFQDN <String>]
[-EnableAutoUpdate <Boolean>]
[-BitsUpdateTimeWindow <Int32>] [-OsUpdateTimeWindow <Int32>] [-Force]
[-WhatIf] [-Confirm]
[<CommonParameters>]
* Set CsOnlinePSTNUsage
Modifies a set of strings that identify the allowed online public switched telephone network (PSTN) usages. This cmdlet can be used to add usages to the list of online PSTN usages or remove usages from the list.
Syntax:
Set-CsOnlinePstnUsage [[-Identity] <string>]
[-Usage <Object>] [-WhatIf]
[-Confirm] [<CommonParameters>] Reference:
https://learn.microsoft.com/en-us/powershell/module/skype/set-csonlinepstngateway

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 3

You have a Microsoft Teams Phone deployment.
You need to provide two users with the ability to share a single phone number for inbound and outbound calling.
What are two ways to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

  • A. call queues
  • B. call forwarding
  • C. group call pickup
  • D. call delegation
  • E. call park

Answer: AC

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/create-a-phone-system-call-queue
https://docs.microsoft.com/en-us/microsoftteams/call-sharing-and-group-call-pickup

NEW QUESTION 4

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You need to create a new call queue to route calls to support agents. The support agents must be able to see their call queue history and the shared transcribed voicemail. The solution must minimize administrative effort.
Solution: You configure the call queue to use a Microsoft 365 group. Does this meet the goal?

  • A. Yes
  • B. No

Answer: A

Explanation:
Reference:
https://www.orbid365.be/shared-voicemail-arrives-in-teams/

NEW QUESTION 5

You have a Microsoft Teams Phone deployment that uses Direct Routing.
You plan to use Microsoft Power BI to analyze Call Quality Dashboard (CQD) data for the deployment. You download the Power BI query templates for CQD from the Microsoft Download Center.
You need to use Power BI Desktop to review reports about PSTN calls that go through Direct Routing. What should you do first?

  • A. From Microsoft Call Quality Dashboard download the current Tenant Data Upload file
  • B. Publish the template to the Power B[ service.
  • C. Install the Power Bl Connector for CQD.
  • D. Install the Microsoft Power Platform connector.

Answer: C

Explanation:
Before you can use these PBIT files, you'll need to Install the Power BI Connector for Microsoft CQD using the MicrosoftCallQuality.pqx file included in the download.
Reference:
https://docs.microsoft.com/en-us/microsoftteams/cqd-power-bi-query-templates

NEW QUESTION 6

You have a Microsoft Teams Phone deployment.
You need to implement PSTN connectivity by using Direct Routing.
What are three requirements for the implementation? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

  • A. a Session Border Controller (SBC) that uses a hostname in the onmicrosoft.com domain
  • B. a firewall rule that opens a TCP signaling port to Microsoft Teams
  • C. a public DNS entry that maps the FQDN of the Session Border Controller (SBC) to a public IP address
  • D. a firewall rule that opens a UDP signaling port to Microsoft Teams
  • E. a Teams-certified Session Border Controller (SBC)

Answer: BCE

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/direct-routing-plan

NEW QUESTION 7

You need to configure a toll-free dial in bridge for Teams meetings. The solution must meet the technical requirements.
Which three prerequisites must be met before you can assign the toll-free bridge to Teams meeting organizers? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

  • A. Purchase Communications Credits.
  • B. Assign a phone number to a resource account.
  • C. Get an auto attendant toll-free number.
  • D. Get a Dedicated conference bridge (Toll Free) number.
  • E. Purchase a Microsoft 365 Domestic and International Calling Plan license.
  • F. From the meeting policy, set Allow dial -in users to bypass the lobby to On.
  • G. Assign a phone number to the bridge.

Answer: ADG

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/set-up-audio-conferencing-in-teams

NEW QUESTION 8

You have a Microsoft Teams Phone deployment that contains two users named User1 and User2. User1 will be on leave for two weeks.
You need to redirect all calls to the phone number of User1 to the phone number of User2. The solution must minimize administrative effort.
What should you modify for User1?

  • A. the voicemail transfer target settings
  • B. the call delay and order settings
  • C. the call delegation settings
  • D. the phone number type

Answer: C

Explanation:
Use the Teams admin center
You can use the Teams admin center to configure call forward and unanswered settings, group call pickup, and call delegation for your users.
To configure immediate call forward settings:
MS-721 dumps exhibit In the Teams admin center, go to Users > Manage users and select a user.
MS-721 dumps exhibit On the user details page, go to the Voice tab.
MS-721 dumps exhibit Under Call answering rules, select Be immediately forwarded, and select the appropriate call forward type and destination.
To configure simultaneous ringing, on the same page select Ring the user's devices. In the Also allow drop-down, select the appropriate simultaneous ringing setting.
To configure unanswered settings, on the same page select the appropriate setting in the If unanswered
drop-down. In the Ring for this many seconds before redirecting drop-down, specify the number of seconds to wait.
The configuration of call delegation and group call pickup are integrated into the call forward and unanswered settings by selecting the appropriate type. For example, to configure that calls should also ring the user's delegates, on the same page select Call delegation under Also allow. Then add the appropriate delegates by selecting Add people and clicking Save.
Reference:
https://learn.microsoft.com/en-us/microsoftteams/user-call-settings

NEW QUESTION 9

You have a Microsoft Teams Phone deployment that uses Direct Routing. You create a new Teams user named User1.
You need to enable User1 as an agent in a call queue. What should you do first?

  • A. Assign a dial plan to User1.
  • B. Assign a phone number to User1.
  • C. Enable hosted voicemail for User1.
  • D. Enable Enterprise Voice for User1.

Answer: D

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/plan-auto-attendant-call-queue

NEW QUESTION 10

You have a Microsoft Teams Phone deployment. You implement Teams Rooms on Windows.
You need to apply a custom theme to the display of Team1 Rooms on Windows. What should you configure?

  • A. a configuration profile
  • B. a SkvDeSettinas.xml file
  • C. a team template
  • D. a LayoutModification.xml file

Answer: C

Explanation:
Custom background template
To create custom backgrounds that meet the guidelines in the previous sections, you can download the Microsoft Teams Rooms Theme Template.
The template is a .PSD file that can be opened by apps such as Adobe Photoshop or Paint.NET (a plug-in may be required). The template provides assets and guidelines to help you place text and graphics in your custom backgrounds that won't be obscured by on-screen elements.
Reference:
https://learn.microsoft.com/en-us/microsoftteams/rooms/custom-backgrounds

NEW QUESTION 11

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company uses Microsoft Teams Calling Plans.
The company acquires a small development team. Currently, users on the team have their own direct inward dial (DID) numbers that have PSTN capabilities.
You migrate the users to Teams.
You need to ensure that the users have phone numbers. Solution: You run the New-CsHybridTelephoneNumber cmdlet. Does this meet the goal?

  • A. Yes
  • B. No

Answer: B

NEW QUESTION 12

You need to ensure that numbers dialed from the Melbourne warehouse conform to the dialing rules of the phone earner. How should you complete the command? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
MS-721 dumps exhibit


Solution:
MS-721 dumps exhibit

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 13

You have a Teams Phone deployment that contains an Operator Connect provider in Canada. You implement a common area phone named lobbyphone1.
You need to configure lobbyphonel to meet the following requirements:
• Outgoing calls must be placed only from within Canada.
• Dial out during audio conferencing must be restricted.
How should you complete the command? To answer, select the appropriate options in the answer area.
MS-721 dumps exhibit


Solution:
MS-721 dumps exhibit

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 14

You have a Microsoft Teams Phone deployment.
You have a dial plan that contains the following normalization rule:
MS-721 dumps exhibit Pattern: ^8?(\d{7})$
MS-721 dumps exhibit Translation: +1330$1
How will the phone numbers be normalized? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
MS-721 dumps exhibit


Solution:
MS-721 dumps exhibit

Does this meet the goal?
  • A. Yes
  • B. Not Mastered

Answer: A

NEW QUESTION 15

You have a Microsoft Teams Phone deployment. You are deploying Direct Routing.
All users have a SIP URI in the format of user@contoso.com. The Session Border Controller (SBC) is named sbc.voice.contoso.com.
When troubleshooting errors on the SBC, you receive the warning shown in the following exhibit.
MS-721 dumps exhibit
What is a possible cause of the issue?

  • A. The certificate does not match the FQDN on the SBC.
  • B. The firewall blocks inbound traffic on port 443 to the SBC.
  • C. Only TLS 1.0 is enabled on the SBC.
  • D. Microsoft 365 Phone System licenses are not assigned to the users.

Answer: A

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/troubleshoot/phone-system/direct-routing/sip-options-tls-certif

NEW QUESTION 16

You have a Microsoft Teams Phone deployment.
You have Teams devices located in meeting rooms and public areas. You need to turn on Device lock for the devices.
What should you configure?

  • A. a calling policy
  • B. a setup policy
  • C. a Teams policy
  • D. a configuration profile

Answer: D

Explanation:
Microsoft Teams Physical Device Management
NOTE: As at June 2020, there are no options to configure the Device Configuration Profiles by API or PowerShell.
There are a number of Microsoft Teams certified devices on the market from several different manufactures. These devices are listed on the Microsoft Teams Devices Page.
Once a device is logged in and the user setup, the device is registered to the tenant and a policy applied against it from the Configuration Profiles listed in the Microsoft Teams Admin Portal.
These Configuration Profiles allow you to set options like the devices: Timeout and lock status
Language Timezone Time format Screen saver
Network settings; and
To enable or disable the second PC port
If the Microsoft 365 tenant also has Intune setup, then the device is registered to Intune and any compliance policies are applied when the first user logs in.
Different Confiugration Profiles can be used to setup phones with common attributes Reference:
https://sbcconnect.com.au/pages/physical-device-management.html

NEW QUESTION 17

You need to recommend a PSTN solution for the Teams Phone deployment at the retail sites. The solution must meet the technical requirements.
What should you include in the recommendation?

  • A. Teams Calling Plans
  • B. Direct Routing without media bypass
  • C. Operator Connect
  • D. Direct Routing with media bypass

Answer: C

Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/pstn-connectivity

NEW QUESTION 18
......

100% Valid and Newest Version MS-721 Questions & Answers shared by Certshared, Get Full Dumps HERE: https://www.certshared.com/exam/MS-721/ (New 156 Q&As)