A Review Of Refined DES-4122 Free Demo

NEW QUESTION 1

What happened on April 30, 2019?


Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: C

NEW QUESTION 2

What is a requirement to operate GPUs in a Dell EMC PowerEdge R740 server?

• A. All GPU cards must be installed at the same time
• B. All GPU cards must be of the same type but can be a different model
• C. All GPU cards must be of the same type and model
• D. All GPU cards must be installed on the same riser card.

Answer: A

NEW QUESTION 3

A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only "sees" 24 threads in total.
Which setting should the technician change in Processor Settings in the System BIOS?

• A. System Profile
• B. Virtualization Technology
• C. HyperThreading
• D. Number of Cores per Processor

Answer: A

NEW QUESTION 4

A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system. What Is the cause of this Issue?


Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

• A. The Virtual Console is disabled
• B. Operating system not installed on remote server
• C. The server has been powered down
• D. There are more than the maximum number of active sessions

Answer: C

NEW QUESTION 5

What is used by the Lifecycle Controller to directly back up the server profile on a 14G Dell EMC PowerEdge server?

• A. Network share
• B. vFlash SD card
• C. USB Flash drive
• D. IDSDM SD card

Answer: A

NEW QUESTION 6

Which processor configuration is used by the Dell EMC PowerEdge R740 server?

• A. 4 socket AMD
• B. 2 socket AMD
• C. 2 socket Intel
• D. 4 socket Intel

Answer: C

NEW QUESTION 7

What is required to use the iSM Automatic System Recovery feature?

• A. Server Administrator installed
• B. OS watchdog timer disabled
• C. Server Administrator not installed
• D. OS watchdog timer enabled

Answer: B

NEW QUESTION 8

A Dell EMC PowerEdge R740 server requires a vFlash SD card urgently. Additional vFlash Cards and components from other servers are available.
What is the recommended solution?

• A. Use a configuration option to convert an NVMe drive to a virtual vFlash
• B. Use a configuration option to convert BOSS to a virtual vFlash
• C. Reuse an existing vFlash SD card from a 14G server
• D. Reuse an existing vFlash SD card from either a 13G or 14G server

Answer: C

NEW QUESTION 9

A technician needs to change the iDRAC password on a Dell EMC PowerEdge 14G server in a lights-out datacenter. The be rebooted because it is in production. The iDRAC is configured with the default credentials
How could the technician change the iDRAC password?

• A. SupportAssist Enterprise
• B. iDRAC Web GUI
• C. OpenManage Server Administrator
• D. Virtual Console; press F2 after rebooting system

Answer: A

NEW QUESTION 10

An engineer needs to upgrade a Dell EMC PowerEdge R440 server from a single PSU to dual PSU configuration. There are unused PSU modules from PowerEdge R430 and R420 servers available, and they have the same wattage ratings.
What should the engineer do to complete the task?

• A. Add the PowerEdge R420 PSU modules to the PowerEdge R440
• B. Order a new PSU specific to the existing PowerEdge R440
• C. Add the PowerEdge R430 PSU modules to the PowerEdge R440
• D. Configure the PowerEdge R440 PSU with 1+1 configuration

Answer: A

NEW QUESTION 11

A technician is sent on-site to troubleshoot a server that produced an error message during the most recent POST, but then completed the POST and booted to the operating system. The user cannot remember the
specific error and no entry was made in the error log relating to this error. How can the technician find out what the error message was?

• A. Access the Lifecycle Controller and view the last boot cycle video capture entry
• B. Reload the BIOS firmware
• C. Export the Server profile and analyze for any POST errors
• D. Access the iDRAC and view the last boot cycle video capture entry

Answer: A

NEW QUESTION 12

What is a characteristic of out-of-band management?

• A. Dedicated device
• B. Agent based
• C. Less secure
• D. Dependent upon OS

Answer: A

NEW QUESTION 13

A technician working with a Dell EMC PowerEdge 1 take corrective action?

• A. Check the System Event Log Check PSU LED Reseat the PSU
• B. Check the System Event Log Check PSU LEDDo a virtual reseat of the iDRAC
• C. Check the LCC Log Check PSU LED Reseat the CPU
• D. Check the LCC Log Check PSU LED Reseat the PSU

Answer: B

NEW QUESTION 14

Which mobile devices are supported by Quick Sync 2.0 in 14G PowerEdge servers?

• A. Android devices only
• B. iOS, Android, and Windows Phone devices
• C. iOS and Android devices only
• D. iOS devices only

Answer: C

NEW QUESTION 15

Which card connects to the PCI bus, is physically smaller than a on the system board of a Dell EMC PowerEdge 14G server?

• A. NDC
• B. OCP
• C. PCIe
• D. FPGA

Answer: C

NEW QUESTION 16

What can be done using in-band management?

• A. Agentless discovery
• B. Firmware and driver updates
• C. Network bandwidth optimization
• D. Remote access

Answer: C

NEW QUESTION 17

Which rear disk drive option is available in a Dell EMC PowerEdge R740xd server?

• A. 4x 3.5" drives
• B. 2x3.5" drives
• C. 8x2 5" drives
• D. 6x2 5" drives

Answer: B

NEW QUESTION 18

You must configure a BOSS card with 2 x 120GB drives for a Dell EMC PowerEdge server. What is the only supported mode?

• A. RAID 0
• B. RAID 5
• C. RAID 1
• D. Non-RAID Mirroring

Answer: A

NEW QUESTION 19
......