A Review Of Downloadable 300-625 Real Exam

NEW QUESTION 1
Two stable fabrics have overlapping domains. After a switch from the first domain is joined to a switch from the second domain, both switches become isolated. What caused the problem?

• A. The autoreconfigure option is disabled on both switches.
• B. The autoreconfigure option is enabled on both switches.
• C. The rcf-reject option is enabled on the interfaces.
• D. The rcf-reject option is disabled on the interfaces.

Answer: A

NEW QUESTION 2
DRAG DROP
Drag and drop the items from the left onto the correct descriptions on the right. Not all items are used.
Select and Place:

• A. Mastered
• B. Not Mastered

Answer: A

NEW QUESTION 3
What is the effect of a non-graceful virtual machine shutdown on a virtualized server that is connected to a SAN with Fibre Channel interfaces?

• A. NP Port reload connected to the upstream SAN switch
• B. out-of-service Fibre Channel interfaces on the SAN switch
• C. frames stuck in the storage system
• D. frames stuck in the HBA buffer of the server

Answer: B

NEW QUESTION 4
Refer to the exhibits.


A storage network engineer activates a zoneset on MDS-A and verifies the successful activation (Exhibit 1). The engineer is then notified that there is a SAN outage (Exhibit 2) What is the cause of the outage?

• A. Another network engineer activated zoneset ZoneSetMDS-B-VSAN100 on MDS-A.
• B. Another network engineer issued the zone mode enhanced vsan 100 command on another switch in the fabric.
• C. Another network engineer activated the zoneset ZoneSetMDS-B-VSAN100 command on another switch in the fabric.
• D. Another network engineer issued the zone default-zone permit vsan 100 command on another switch in the fabric.

Answer: D

NEW QUESTION 5
Which configuration is always required when running the setup utility on a Cisco MDS 9000 Series Switch?

• A. administrator password
• B. management IP address
• C. active NTP server
• D. active default gateway

Answer: A

NEW QUESTION 6
DRAG DROP
Drag and drop the boot issues from the left onto the correct solutions on the right.
Select and Place:

• A. Mastered
• B. Not Mastered

Answer: A

NEW QUESTION 7
Which two steps are mutual between Cisco secure boot and UEFI secure boot? (Choose two.)

• A. bootloader
• B. operating system
• C. microloader
• D. kemel
• E. hardware anchor

Answer: AB

NEW QUESTION 8
What is the function of the 0xFFFFFC address in a Fibre Channel fabric?

• A. management server
• B. fabric controller
• C. name server
• D. time server

Answer: C

NEW QUESTION 9
A storage network engineer is implementing disk-array data replication between two SAN environments in two different data centers not connected via Fibre Channel. Which SAN switch feature must be implemented?

• A. FCIP
• B. zoning merge over LAN
• C. VSAN scoping
• D. IVR

Answer: A

NEW QUESTION 10
Refer to the exhibit.

A network engineer created a new user that uses the VSAN-Admin role on a Cisco MDS switch so a new colleague can manage the VSANs configured on the switch. Which action is required for the configuration to give permission to the new colleague?

• A. permit vsan 1-1000 must be configured as rule 5.
• B. permit vsan 1-1000 must be configured as rule 1.
• C. permit vsan 1-1000 must be configured under the VSAN policy deny.
• D. permit vsan 1-1000 must be configured under the VSAN policy allow.

Answer: C

NEW QUESTION 11
What does an unlicensed DCNM SAN fail to display?

• A. Fibre Channel, FCoE, and iSCSI topologies
• B. events and fault management
• C. historical performance monitoring
• D. real-time performance monitoring

Answer: C

NEW QUESTION 12
A storage network engineer must install and configure a new MDS switch in a data center network. Which two statements about available choices during the MDS switch initial setup are correct? (Choose two.)

• A. The engineer can choose what will be the administrator account.
• B. The secure password standard is required.
• C. The engineer can configure the default zone policy.
• D. The engineer can configure the default switch port trunk mode.
• E. The engineer does not have the choice to enable or disable full zoneset distribution.

Answer: AC

NEW QUESTION 13
Which Cisco NX-OS command displays the VSAN that is associated with each FCID?

• A. show fcdomain
• B. show fc2 plogi
• C. show vsan database
• D. show flogi database

Answer: A

NEW QUESTION 14
Which component is initially responsible for loading the kickstart image on Cisco MDS Switches?

• A. ROMMON
• B. BIOS
• C. NX-OS
• D. BASH

Answer: C

NEW QUESTION 15
A storage administrator is configuring inter-VSAN routing on a fabric that contains duplicate domain IDs. Which feature must be configured to ensure continued operation?

• A. auto topology
• B. transit VSANs
• C. IVR NAT
• D. virtual domains

Answer: C

NEW QUESTION 16
Which command identifies the application and the user that have a Cisco Fabric Services session open?

• A. show cfs application
• B. show zoneset active
• C. show cfs lock
• D. show device-alias database

Answer: A

NEW QUESTION 17
A storage administrator is enabling DH-CHAP for the first time on a Fibre Channel fabric. Which condition must the administrator consider while configuring this feature?

• A. NTP must be configured on all devices or the configuration fails.
• B. The MD5 hash must be used if TACACS+ or RADIUS authentication for FCSP is enabled.
• C. All switches on the fabric must be configured for the same password.
• D. Enabling DH-CHAP protocol feature is unsupported on FCIP interfaces.

Answer: B

NEW QUESTION 18
A storage administrator is upgrading Cisco NX-OS on a Cisco MDS switch. The administrator performs an ISSU upgrade following the configuration guide. While the install is proceeding, the administrator connects a new server to the switch, which cannot access storage. The existing servers continue to operate properly through the switch. Why is the new server failing to connect?

• A. The fabric data plane resets as part of the upgrade process.
• B. The new server is unable to log in to the fabric to receive an FC-ID.
• C. The upgrade process disables any currently unused ports.
• D. The zoning database is locked during the upgrade process.

Answer: D

NEW QUESTION 19
A network engineer must run a core Cisco Nexus 9500 Series Switch as a POAP server for all top-of-rack Cisco Nexus switches. Which two network functions must run to provide the POAP service? (Choose two.)

• A. DNS
• B. PXE
• C. BOOTP
• D. TFTP
• E. DHCP

Answer: DE

NEW QUESTION 20
Which result occurs if a device alias is renamed and then the original device alias name is used in an add command in the same session?

• A. Both commands execute successfully.
• B. The device alias is renamed and the add command is moved to the rejected list.
• C. Both commands are moved to the rejected list.
• D. The rename command is moved to the rejected list and the add command executes successfully.

Answer: A

NEW QUESTION 21
DRAG DROP
Drag and drop the FLOGI parameters from the left onto the descriptions from which they were-derived on the right.
Select and Place:

• A. Mastered
• B. Not Mastered

Answer: A

NEW QUESTION 22
Which EtherType is used by the FCoE Initialization Protocol?

• A. 0×8913
• B. 0×8914
• C. 0×xfc0e
• D. 0×8906

Answer: B

NEW QUESTION 23
Which feature on MDS platforms ensures that the code that is running on the hardware platform is authentic and unmodified, while also validating the BIOS to eliminate any rootkits.

• A. Cisco Secure Boot
• B. UEFI Secure Boot
• C. Secure Unique Device Identifier
• D. BIOS Secure Boot

Answer: A

NEW QUESTION 24
......