Most Recent 300-475 Questions 2021

NEW QUESTION 1
What are the general steps to creating a tenant with Cisco ASA services?

• A. Create the tenant, apply the graph to the contract subject, define the Layer 4 to Layer 7 service device cluster, define the logical device content, create the service graph.
• B. Click the Create ASA Services button in the Cisco APIC Management Interface and enter the appropriate text and information.
• C. Create the tenant, define the Layer 4 to Layer 7 service device cluster, create the service graph, define the logical device content, apply the graph to the contract subject.
• D. You should not create the Cisco ASA Services as a tenant; it should be created as a bridge domain.

Answer: C

NEW QUESTION 2
In Cisco ACI, which three statements are true about endpoints and endpoint groups? (Choose three.)

• A. EPGs contain endpoints that have common policy requirements such as security, virtual machine mobility, QoS, or Layer 4 to Layer 7 services.
• B. An EPG can be statically configured by an administrator in the Cisco APIC, or dynamically configured by an automated system such as vCenter or OpenStack.
• C. Policies are applied to individual endpoints rather than EPGs for better efficiency.
• D. Endpoints have an address (identity), a location, attributes (such as version or patch level), and can be physical or virtual.
• E. Endpoints have attributes and can only be virtual.
• F. An EPG can only be configured statically by an administrator in the Cisco APIC.

Answer: ABD

NEW QUESTION 3
How does the Cisco ACI fabric decouple host identity from its location in the fabric?

• A. VTEP addresses
• B. contract
• C. end point groups
• D. L2VPN EVPN address family

Answer: C

NEW QUESTION 4
Which two options outline the design requirements for spine nodes in a Clos design? (Choose two.)

• A. host connectivity scalability
• B. spine interconnectivity
• C. leaf interconnectivity
• D. high 40-Gb/s port density

Answer: CD

NEW QUESTION 5
Cisco ACI uses which protocol as Southbound Protocol?

• A. OpFlex
• B. RIP
• C. OpenFlow
• D. EIGRP

Answer: A

NEW QUESTION 6
Which three Cisco ACI migration options are available? (Choose three.)

• A. application-centric
• B. hybrid approach
• C. application port-centric
• D. hybrid application-centric
• E. network port-centric
• F. network-centric

Answer: ABF

NEW QUESTION 7
Which network protocol is used for Cisco ACI fabric data plane forwarding?

• A. VXLAN
• B. ISIS
• C. MP-BGP
• D. FabricPath

Answer: A

NEW QUESTION 8
Which best describes the Cisco ACI fabric configuration?

• A. manual discovery, manual provisioning, 10- and 40-Gb/s links, Clos design
• B. autodiscovery, manual provisioning, 10- and 40-Gb/s links, Clos design
• C. autodiscovery, zero-touch provisioning, 40-Gb/s links, Clos design
• D. manual discovery, zero-touch provisioning, 40-Gb/s links, Clos design

Answer: C

NEW QUESTION 9
Which answer accurately describes the fat tree design implemented as part of the Cisco ACI fabric?

• A. Clos architecture, Cisco APICs, and hosts connect to spine
• B. Policies are enforced on leafs and spines.
• C. Clos architecture, Cisco APICs, and hosts connect to leaf
• D. Policies are enforced on leafs only.
• E. Multitier architecture, Cisco APICs, and hosts connect to spine
• F. Policies are enforced on spines only.
• G. Multitier architecture, Cisco APICs, and hosts connect to leaf
• H. Policies are enforced on leafs only.

Answer: B

NEW QUESTION 10
Which entity manages Layer 4 to Layer 7 services in the Cisco ACI?

• A. vendor
• B. Cisco APIC
• C. MP-BGP
• D. ISIS

Answer: B

NEW QUESTION 11
In Cisco ACI, what enables inter-End Point Group communications?

• A. contracts
• B. subcontracts
• C. private VLANs
• D. community VLANs

Answer: A

NEW QUESTION 12
How do the Cisco APICs initially connect to and configure the fabric in-band?

• A. single link (active/passive), Infra VLAN for spine and leaf configuration
• B. port-channel, Infra VLAN for spine and leaf configuration
• C. single link (active/passive)
• D. single link (active/passive), Layer 3 management interface for spine and leaf configuration

Answer: A

NEW QUESTION 13
In Cisco ACI, which three statements are true about bridge domains? (Choose three.)

• A. Bridge domains can operate in two modes: legacy and normal.
• B. Bridge domains can span multiple switches.
• C. A bridge domain can contain multiple subnets, but a subnet is contained within a single bridge domain.
• D. Subnets can span multiple EPGs; one or more EPGs can be associated with one bridge domain or subnet.
• E. Unicast routing is applicable for bridge domains under normal mode.
• F. Bridge domain legacy mode allows multiple VLANs per bridge domain.

Answer: BCD

NEW QUESTION 14
In Cisco ACI, which two statements are true about contexts? (Choose two.)

• A. A tenant can have multiple contexts.
• B. A context defines a Layer 2 address domain; whereas the bridge domain defines the unique Layer 3 MAC address domain.
• C. A context is equivalent to a virtual routing and forwarding instance in the networking world.
• D. A context can be associated with only one bridge domain.

Answer: AC

NEW QUESTION 15
In Cisco ACI, general steps are required to create an Application Network Profile. In Cisco ACI, general steps are required to create an Application Network Profile. Which order should the configuration be done?
1) Create connection points between EPGs by using policy constructs.
2) Create policies to define connectivity with permit, deny, log, and so on.
3) Create EPGs.

• A. 3, 2, 1
• B. 1, 2, 3
• C. 2, 3, 1
• D. 1, 3, 2

Answer: A

NEW QUESTION 16
Which two options are supported by the Cisco ACI contract model? (Choose two.)

• A. ether type
• B. COS marking
• C. TCP source port
• D. logging type

Answer: AC

NEW QUESTION 17
Which three networking architectures is the Cisco ACI architecture based on? (Choose three.)

• A. leaf-and-spine architecture
• B. multicast gateway
• C. a controller that is not involved in traffic forwarding
• D. software-based mapping database lookup
• E. zero-touch provisioning for all loopbacks, Layer 3 links, and routing within the fabric
• F. Host-based forwarding in the mapping database that provides IP-to-VLAN tunnel endpoint mapping information to the spine

Answer: ACE

NEW QUESTION 18
Which two statements describe overlay functionality in the Cisco ACI? (Choose two.)

• A. Forwarding is not limited to or constrained by the encapsulation type or encapsulation network.
• B. Forwarding is limited to and constrained by the encapsulation type of encapsulation network.
• C. External identifiers are not local to the leaf or leaf port.
• D. External identifiers are local to the leaf or leaf port.

Answer: AD

NEW QUESTION 19
Which two guidelines or restrictions are valid when using traceroute? (Choose two.)

• A. When the traceroute source or destination is an endpoint, the endpoint must be dynamic and not static.
• B. The traceroute source and destination IP addresses are configured as a combination of IPv4 and IPv6 addresses.
• C. Traceroute only supports endpoint-to-endpoint mode.
• D. A traceroute that is initiated from the tenant endpoints shows the default gateway as an intermediate hop that appears at the ingress leaf switch.

Answer: AD

NEW QUESTION 20
Which three languages can be leveraged when developing programmatic interaction with the Cisco APIC? (Choose three.)

• A. Python
• B. Ruby
• C. Dash
• D. Puppet
• E. XML
• F. HTML

Answer: ABC

NEW QUESTION 21
......