Breathing 300-430 Lab 2021

NEW QUESTION 1
What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarms page?

• A. 3 hours
• B. 24 hours
• C. 3 days
• D. 7 days

Answer: B

NEW QUESTION 2
An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN. Which configuration is needed to complete this task?

• A. Change the WLAN reserved bandwidth for WebEx
• B. Create an AVC profile for WebEx
• C. Create an ACL for WebEx
• D. Change the AVC application WebEx-app-sharing to mark

Answer: B

NEW QUESTION 3
An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant? (Choose two.)

• A. X, Y real location
• B. client description
• C. AP name
• D. client MAC address
• E. WLC IP address

Answer: AD

NEW QUESTION 4
Which statement about the VideoStream/Multicast Direct feature is true?

• A. IP multicast traffic is reliable over WLAN by default as defined by the IEEE 802.11 wireless multicast delivery mechanism.
• B. Each VideoStream client acknowledges receiving a video IP multicast stream.
• C. It converts the unicast frame to a multicast frame over the air.
• D. It makes the delivery of the IP multicast stream less reliable over the air, but reliable over Ethernet.

Answer: B

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/configuration-guide/b_cg81/multicast_broadcast_setup.html

NEW QUESTION 5
An engineer must implement Cisco Identity-Based Networking Services at a remote site using ISE to dynamically assign groups of users to specific IP subnets. If the subnet assigned to a client is available at the remote site, then traffic must be offloaded locally, and subnets are unavailable at the remote site must be tunneled back to the WLC. Which feature meets these requirements?

• A. learn client IP address
• B. FlexConnect local authentication
• C. VLAN-based central switching
• D. central DHCP processing

Answer: C

NEW QUESTION 6
An engineer is configuring multicast for wireless for an all-company video meeting on a network using EIGRP and BGP within a single domain from a single source. Which type of multicast routing should be implemented?

• A. Protocol Independent Multicast Dense Mode
• B. Source Specific Multicast
• C. Multicast Source Discovery Protocol
• D. Protocol Independent Multicast Sparse Mode

Answer: D

NEW QUESTION 7
Which two events are outcomes of a successful RF jamming attack? (Choose two.)

• A. disruption of WLAN services
• B. unauthentication association
• C. deauthentication broadcast
• D. deauthentication multicast
• E. physical damage to AP hardware

Answer: AE

NEW QUESTION 8
An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which element do you configure in a rule?

• A. permit-ACL
• B. WMM required
• C. mark
• D. rate-limit

Answer: C

NEW QUESTION 9
A wireless engineer needs to implement client tracking. Which method does the angle of arrival use to determine the location of a wireless device?

• A. received signal strength
• B. triangulation
• C. time distance of arrival
• D. angle of incidence

Answer: D

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/WiFiLBS-DG/wifich2.html

NEW QUESTION 10
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?

• A. 10 seconds
• B. 15 seconds
• C. 30 seconds
• D. 60 seconds

Answer: B

Explanation:
Reference: https://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/CAS/configuration/guide/msecg_ch4_CAS.html

NEW QUESTION 11
The IT manager is asking the wireless team to get a report for all guest user associations during the past two weeks. In which two formats can Cisco Prime save this report? (Choose two.)

• A. CSV
• B. PDF
• C. XLS
• D. DOC
• E. plain text

Answer: AB

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-2/user/guide/bk_CiscoPrimeInfrastructure_3_2_0_UserGuide/bk_CiscoPrimeInfrastructure_3_2_0_UserGuide_chapter_01010.html

NEW QUESTION 12
During the EAP process and specifically related to the client authentication session, which encrypted key is sent from the RADIUS server to the access point?

• A. WPA key
• B. session key
• C. encryption key
• D. shared-secret key

Answer: B

NEW QUESTION 13
An IT team is growing quickly and needs a solution for management device access. The solution must authenticate users from an external repository instead of the current local on the WLC, and it must also identify the user and determine what level of access users should have. Which protocol do you recommend to achieve these goals?

• A. network policy server
• B. RADIUS
• C. TACACS+
• D. LDAP

Answer: C

NEW QUESTION 14
Where is a Cisco OEAP enabled on a Cisco Catalyst 9800 Series Wireless Controller?

• A. RF Profile
• B. Flex Profile
• C. Policy Profile
• D. AP Join ProfileCorrect

Answer: B

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/flexconnect.html

NEW QUESTION 15
A customer is experiencing performance issues with its wireless network and asks a wireless engineer to provide information about all sources of interference and their impacts to the wireless network over the past few days. Where can the requested information be accessed?

• A. CleanAir reports on Cisco Prime Infrastructure
• B. Performance reports on Cisco Prime Infrastructure
• C. Interference Devices reports on Cisco Wireless LAN Controller
• D. Air Quality reports on Cisco Wireless LAN Controller

Answer: A

NEW QUESTION 16
Refer to the exhibit. An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?

• A. It must be Inbound because traffic goes to the WLC.
• B. Packet direction has no significance; it is always Any.
• C. It must be Outbound because it is traffic that is generated from the WLC.
• D. To have the complete list of options, the CPU ACL must be created only by the CLI.

Answer: A

NEW QUESTION 17
Which command set configures a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port?
A.

B.

• A.
• B.

Answer: B

NEW QUESTION 18
A Cisco WLC has been added to the network and Cisco ISE as a network device, but authentication is failing. Which configuration within the network device configuration should be verified?

• A. SNMP RO community
• B. device interface credentials
• C. device ID
• D. shared secret

Answer: D

NEW QUESTION 19
An engineer must implement rogue containment for an SSID. What is the maximum number of APs that should be used for containment?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: D

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/technology/roguedetection_deploy/Rogue_Detection.html

NEW QUESTION 20
Which two protocols are used to communicate between the Cisco MSE and the Cisco Prime Infrastructure network management software? (Choose two.)

• A. HTTPS
• B. Telnet
• C. SOAP
• D. SSH
• E. NMSP

Answer: AE

NEW QUESTION 21
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)

• A. Static WEP + 802.1X
• B. WPA+WPA2
• C. Static WEP
• D. CKIP
• E. 802.1X

Answer: BC

NEW QUESTION 22
Which component must be integrated with Cisco DNA Center to display the location of a client that is experiencing connectivity issues?

• A. Cisco Hyperlocation Module
• B. Wireless Intrusion Prevention System
• C. Cisco Connected Mobile Experiences
• D. Cisco Mobility Services Engine

Answer: A

NEW QUESTION 23
Which two steps are needed to complete integration of the MSE to Cisco Prime Infrastructure and be able to track the location of clients/rogues on maps? (Choose two.)

• A. Synchronize access points with the MSE.
• B. Add the MSE to Cisco Prime Infrastructure using the CLI credentials.
• C. Add the MSE to Cisco Prime Infrastructure using the Cisco Prime Infrastructure communication credentials configured during set up.
• D. Apply a valid license for Wireless Intrusion Prevention System.
• E. Apply a valid license for location tracking.

Answer: DE

NEW QUESTION 24
When implementing self-registration for guest/BYOD devices, what happens when an employee tries to connect four devices to the network at the same time?

• A. The last device is removed and the newly added device is updated as active device.
• B. The registration is allowed, but only one device is connected at any given time.
• C. All devices are allowed on the network simultaneously.
• D. Purge time dictates how long a device is registered to the portal.

Answer: B

NEW QUESTION 25
......