High value 300-160 Exam Questions and Answers 2021

We provide which are the best for clearing 300-160 test, and to get certified by Cisco DCID Designing Cisco Data Center Infrastructure. The covers all the knowledge points of the real 300-160 exam. Crack your Cisco 300-160 Exam with latest dumps, guaranteed!

Check 300-160 free dumps before getting the full version:

NEW QUESTION 1
Which two technologies can you use to automate the deployment of a data center network? (Choose two.)

  • A. Cisco ACI
  • B. Cisco WAAS
  • C. vPC
  • D. Cisco PfR
  • E. Cisco DFA

Answer: AC

NEW QUESTION 2
A customer is interested in endpoint security at the access layer, which option is Cisco recommended?

  • A. ACLs
  • B. DAI
  • C. TrustSec
  • D. stateful inspection
  • E. UDLD

Answer: C

NEW QUESTION 3
Refer to the exhibit.
300-160 dumps exhibit
Based on the facts for the given connection, which DCI technology do you use?

  • A. OTV
  • B. VPLS
  • C. EoMPLS
  • D. dark fiber

Answer: D

NEW QUESTION 4
When migrating an existing data center network to a unified fabric network, which transitions should you expect to see?

  • A. IOS to Nexus networking equipment
  • B. physical to virtual machines
  • C. Fibre Chanel to FCoE
  • D. iSCSI to NAS

Answer: C

NEW QUESTION 5
Which two options are reasons to use Layer 3 routing to segment a data center instead of Layer 2 switching? (Choose two.)

  • A. limit the scope Spanning Tree Protocol
  • B. limit the scope simplify design
  • C. broadcast flooding
  • D. ease of routing protocol configuration
  • E. cost

Answer: AB

NEW QUESTION 6
Refer to the exhibit.
300-160 dumps exhibit
Your client has an existing SAN network that includes two ISL links between two Cisco MDS core
switches The client asks you to design a feature that load balances the SCSI exchanges coming from the initiator over the two ISL links The design must be capable of overcoming link failures Which design feature is required?

  • A. FabricPath
  • B. ECMP
  • C. OXID
  • D. FSPF supports this load balancing without the need for any additional features

Answer: D

NEW QUESTION 7
LISP provides which capability?

  • A. host connectivity redundancy
  • B. physical host mobility
  • C. VM mobility
  • D. VXLAN mobility

Answer: B

NEW QUESTION 8
In a three-tier SAN topology, which network layer should you connect the SAN initiators to?

  • A. storage edge
  • B. core
  • C. host edge
  • D. distribution

Answer: C

NEW QUESTION 9
if you are connecting a Cisco UCS Fabric Interconnect in it's default mode to a SAN, what is the operating mode?

  • A. trunk
  • B. NPIV mode
  • C. switching
  • D. NPV mode

Answer: D

NEW QUESTION 10
Which SAN port type should you use on an NPIV core switch that connects to an NPV edge switch?

  • A. FL
  • B. F
  • C. N
  • D. TE
  • E. E

Answer: B

NEW QUESTION 11
If an individual link fails which three features reduce convergences times when used with the protocols such as?

  • A. Port Channels
  • B. BFD
  • C. ECMP
  • D. WCCP
  • E. IGRP
  • F. NFV

Answer: BCD

NEW QUESTION 12
When you configure FCIP, which two types of acceleration can you enable to maximize WAN link utilization? (Choose two)

  • A. SCSI write
  • B. link
  • C. SCSI tape
  • D. WAN
  • E. IP

Answer: AC

Explanation: http://www.cisco.com/en/US/products/ps5989/products_configuration_guide_chapter09186a0080664e20.html

NEW QUESTION 13
You need to ensure that VXLAN connectivity can survive a chassis failure in a vPC configuration using Cisco Nexus 9300 Series switches. Which address type should be bound to the VLAN NVE tunnel for VTEP to ensure resiliency?

  • A. anycast
  • B. unicast
  • C. multicast
  • D. broadcast

Answer: A

NEW QUESTION 14
Which type of device can be deployed to add multi-homing capability to an OTV implementation?

  • A. vPC
  • B. IS-IS
  • C. Edge
  • D. Layer 2 gateway

Answer: C

NEW QUESTION 15
Which two actions must be performed when you configure Cisco VN-Link in hardware? (Choose two.)

  • A. Create a distributed virtual switch in Cisco UCS Manager.
  • B. Add an ESX host to the distributed virtual switch in Cisco UCS Manager.
  • C. Create a port profile and profile clients in Cisco UCS Manager.
  • D. Create a standard switch on an ESXi host and map the network adapters to the switch.
  • E. Create a distributed virtual switch under the datacenter folder in VMware vCenter.

Answer: AC

NEW QUESTION 16
You are configuring a switch as a LISP xTR. You plan to use the LISP xTR when deploying redundant map servers. Which action do you take?

  • A. Register the LISP xTR to the anycast IP address of the map resolver.
  • B. Register the LISP xTR to the IP address of each map server
  • C. Configure the map notify group command by using the anycast IP address of the map resolver
  • D. Configure the map-notify group command by using the IP address of each map server

Answer: C

NEW QUESTION 17
Which two features are supported by VXLAN on the Cisco NX-OS platform? (Choose two)

  • A. MP-BGP EVPN
  • B. DHCP snooping
  • C. PIM-SM
  • D. OTV
  • E. L2TP

Answer: AC

NEW QUESTION 18
Which two Nexus 7000 licenses are required to manage FabricPath from Cisco Data Center Network Manager (DCNM)? (Choose two.)

  • A. Nexus 7000 Enhanced Layer 2 License
  • B. Nexus 7000 Transport Services License
  • C. Cisco DCNM for SAN Advanced Edition for Nexus 7000
  • D. Nexus 7000 LAN Enterprise License
  • E. Cisco DCNM for Nexus 7000
  • F. Nexus 7000 Scalable Feature License

Answer: AE

100% Valid and Newest Version 300-160 Questions & Answers shared by Certleader, Get Full Dumps HERE: https://www.certleader.com/300-160-dumps.html (New 132 Q&As)