Validated 210-065 Dumps 2021

We provide which are the best for clearing 210-065 test, and to get certified by Cisco Implementing Cisco Video Network Devices v1.0. The covers all the knowledge points of the real 210-065 exam. Crack your Cisco 210-065 Exam with latest dumps, guaranteed!

Cisco 210-065 Free Dumps Questions Online, Read and Test Now.

NEW QUESTION 1
Which video input port is available on a Cisco DX80?

  • A. DVI-D
  • B. DVI-A
  • C. VGA
  • D. HDMI

Answer: D

NEW QUESTION 2
Refer to the exhibit.
210-065 dumps exhibit
Users in a Cisco TelePresence room report audio and video quality issues. You have been asked to troubleshoot the issue. You log in to the endpoint GUI and check telephony settings. Which option would you recommend to resolve the issue?

  • A. Audio/video quality issues are generally due to low bandwidt
  • B. Contact your carrier to increase the bandwidth.
  • C. "DSCP For TelePresence" is not correc
  • D. Configure the correct value via codec GUI.
  • E. "DSCP For Audio" is not correc
  • F. Configure the correct value via codec GUI.
  • G. DSCP values are correc
  • H. Check the QoS configuration on the router.
  • I. The "DSCP For TelePresence" and "DSCP For Audio" values are not correc
  • J. Configure the correct value in codec GUI.
  • K. The "DSCP For TelePresence" and "DSCP For Audio" values are not correc
  • L. Configure the correct value in the Cisco Unified Communications Manager service parameter.

Answer: F

NEW QUESTION 3
An engineer is recovering the password for an admin that has been locked out of a CTS 500-32 not registered to the Cisco Unified Communications Manager. Which option must be entered into the username field when prompted?

  • A. pwreset
  • B. admin
  • C. helpdesk
  • D. pwrecovery

Answer: D

NEW QUESTION 4
A video engineer with ID12345678 wants to provide Cisco Jabber for remote users without VPN connectivity. Which Cisco product must be implemented to achieve this goal?

  • A. Cisco Expressway
  • B. Cisco VCS
  • C. Cisco Unified CM
  • D. Cisco TMS

Answer: A

NEW QUESTION 5
Which desktop endpoint support 802.3af PoE?

  • A. DX70
  • B. DX80
  • C. DX90
  • D. DX650

Answer: D

Explanation: https://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/desktop-collaboration-experience-dx

NEW QUESTION 6
Which codec is most suitable for a video streaming solution?

  • A. AAC-LD
  • B. G.729
  • C. H.264
  • D. G.711

Answer: C

NEW QUESTION 7
Refer to the exhibit.
210-065 dumps exhibit
An employee is reviewing the logs from a Cisco TelePresence System unit due to reports of calls being dropped. Which log entry explains the reason for the call failure?

  • A. INFO Packet loss detected: 100% loss - no media stream received in the last 10 seconds
  • B. INFO Jitter buffers increased
  • C. INFO admin CLI login from 10.160.134.15:51151
  • D. INFO Main Video stream packet loss detected on the center codec

Answer: A

NEW QUESTION 8
Which function does a Cisco TCS recording alias perform?

  • A. It links recorded media to a specified output location.
  • B. It provides a dialable alias that will trigger a TCS recording workflow.
  • C. It sends media to Cisco Medianet.
  • D. It provides an alias for the recorded filename.

Answer: B

NEW QUESTION 9
Which two parameters of the license management set log level product_instances CLI command on the Cisco Prime License Manager are valid? (Choose two.)

  • A. warning
  • B. error
  • C. emergencies
  • D. critical
  • E. alert

Answer: AB

NEW QUESTION 10
Refer to the exhibit.
210-065 dumps exhibit
You are deploying a Cisco VCS Expressway with the Advanced Networking option key into two separate DMZs. Gateways for all networks are the lowest usable IP address in the subnet. While you are logged in as an admin user, which command should you enter into the CLI, to enable IP routing to the Cisco VCS Control and nothing else on the internal network?

  • A. xConfiguration IP Gateway: 172.18.105.1
  • B. xConfiguration RouteAdd Address:192.168.10.25 PrefixLength:16 Gateway: 172.18.105.1 Interface: LAN1
  • C. xCommand RouteAdd Address:192.168.0.0 PrefixLength:16 Gateway: 172.18.105.1 Interface: LAN1
  • D. xCommand RouteAdd Address:192.168.10.25 PrefixLength:32 Gateway: 172.18.105.1 Interface: LAN1

Answer: D

NEW QUESTION 11
An engineer is configuring mobile and remote access. Which three configuration tasks should the engineer perform? (Choose three.)

  • A. Manually configure a Cisco Unified Communications Manager neighbor zone on the Cisco Expressway Core.
  • B. Add the Cisco Unified Communications Manager root certificate to the Cisco Expressway Core CTL.
  • C. Enable TLS verify mode for the traversal zone.
  • D. Add the Cisco Unified Communications domain before enabling services on the Cisco Expressway Core.
  • E. Enable H.323 on the Cisco Unified Communications Manager neighbor zone.
  • F. Add the Cisco Expressway Edge root certificate to the Cisco Unified Communications Manager CTL.

Answer: BCD

NEW QUESTION 12
A network engineer wants to perform a factory reset on a Cisco TelePresence MX device from the CLI. Which command should be used?

  • A. xConfiguration FactoryReset
  • B. xCommand FactoryReset
  • C. xCommand SystemUnit FactoryReset
  • D. xConfiguration SystemUnit FactoryReset

Answer: C

NEW QUESTION 13
Which two methods can be used to set the default call protocol of a Cisco TelePresence endpoint running TelePresence codec firmware? (Choose two.)

  • A. Use the GUI and set System > H.323 > Settings > Default Call Protocol > H.323.
  • B. Use the CLI command xConfiguration Conference 1 DefaultCall Protocol: H323.
  • C. Use the CLI command Conference Default Protocol: H323.
  • D. Use the CLI command Default Protocol: H323.
  • E. Use the GUI and set Configuration > System Configuration > Conference > DefaultCall > H.323.

Answer: BE

NEW QUESTION 14
Jabber fail login with logs. What DNS SRV record need to resolve this issue?

  • A. _SIP
  • B. _SIPS
  • C. _EDGE
  • D. _cisco-uds

Answer: D

NEW QUESTION 15
In this item, you will need to use all information presented to you to successfully answer the question.
210-065 dumps exhibit
210-065 dumps exhibit
210-065 dumps exhibit
The C-Series endpoint (codec) does not register with the Video Communication Server that is located in a different network. Based on the exhibits, what could be causing the issue?

  • A. The subnet mask on the codec is incorrect.
  • B. The ip address of the codec is incorrect.
  • C. The interface that the codec is in is in the wrong VLAN.
  • D. The codec did not receive a DHCP address from the DHCP server.

Answer: A

Explanation: The subnet mask configured on the codec is 255.255.255.128, when it should be 255.255.255.0.

NEW QUESTION 16
A video engineer configured Cisco TMS to allow conference scheduling. The engineer set the Default Reservation Type for Scheduled Calls to Automatic Connect. Which option describes what this action accomplished?

  • A. No conference resources are scheduled until a Cisco TelePresence form is selected.
  • B. Calls are set up and launched by the organizer.
  • C. WebEx invites for conferencing are sent automatically.
  • D. Conferences are automatically started at the scheduled time.

Answer: D

Thanks for reading the newest 210-065 exam dumps! We recommend you to try the PREMIUM Certleader 210-065 dumps in VCE and PDF here: https://www.certleader.com/210-065-dumps.html (377 Q&As Dumps)