What Vivid 201 Study Guide Is
Cause all that matters here is passing the F5-Networks 201 exam. Cause all that you need is a high score of 201 TMOS Administration exam. The only one thing you need to do is downloading Testking 201 exam study guides now. We will not let you down with our money-back guarantee.
Free demo questions for F5-Networks 201 Exam Dumps Below:
NEW QUESTION 1
Refer to the exhibit.
Which Pool Members are receiving traffic?
- A. Serv1, serv2,serv3, serv4
- B. serv1, serv3
- C. serv1, serv3, serv4
- D. serv1
Answer: C
NEW QUESTION 2
A BIG-IP Administrator receives an RMA replacement for a failed F5 device. The BIG-IP Administrator tries to restore a UCS taken from the previous device, but the restore fails. The following error appears inthe/var/log/itm.
mcpd [****J: •*****»;0; License is not operational (expired or digital signature does not match contents.)
What should the BIG-IP Administrator do to avoid this error?
- A. Use the appropriate tmsh command with the no-license option
- B. Revoke the license prior to restoring
- C. Reactivate the license on the new device using the manual activation method
- D. Remove the license information from the UCS archive
Answer: A
NEW QUESTION 3
A BIG-IP Administrator is creating a new Trunk on the BIG-IP device. What objects should be added to the new Trunk being created?
- A. Interfaces
- B. Network routes
- C. VLANS
- D. IP addresses
Answer: A
Explanation:
trunk is a portchannel, you need to add a physical interface.
NEW QUESTION 4
A BIGJP Administrator needs to load a UCS file but must exclude the license file. How should the administrator perform this task?
- A. From the CLI with command U tmsh load /$ys ucs <ucs filename> no-license
- B. From the GUI, select the UCS file, unchcck the license box, and click restore
- C. From the CLI with command(tmos)« tmsh load /sys ucs <ucs filename> no-license
- D. From the GUI, select the UCS file and click restore
Answer: A
NEW QUESTION 5
What should the 816-IP Administrator provide when opening a new ticket with F5 Support?
- A. bigip.license file
- B. QKViewfile
- C. Device root password
- D. SSL private keys
Answer: B
NEW QUESTION 6
The current status of a given pool member is unknown. Which condition could explain that state?
- A. The member has no monitor assigned to it.
- B. The member has a monitor assigned to it and the most recent monitor was successful.
- C. The member has a monitor assigned to it and the monitor did not succeed during the most recent timeout period.
- D. The member's node has a monitor assigned to it and the monitor did not succeed during the most recent timeout period.
Answer: A
NEW QUESTION 7
A BIG-IP Administrator is informed that traffic on Interface 1.1 is expected to increase over the maximum bandwidth capacity on the link. There is a single VLAN on the Interface. What should the 8IG-IP Administrator do to increase the total available bandwidth?
- A. Assign two Interfaces to the VLAN
- B. Set the media speed of Interface 1.1 manually
- C. Create a trunk object with two Interfaces
- D. Increase the MTU on the VLAN using Interface 1.1
Answer: C
NEW QUESTION 8
A site would like to ensure that a given web server's default page is being served correctly prior to sending it client traffic. They assigned the default HTTP monitor to the pool. What would the member status be if it sent
an unexpected response to the GET request.?
- A. The pool member would be marked offline (red).
- B. The pool member would be marked online (green).
- C. The pool member would be marked unknown (blue).
- D. The pool member would alternate between red and green.
Answer: B
NEW QUESTION 9
When upgrading a BIG-IP redundant pair, what happens when one system has been updated but the other has not?
- A. Synching should not be performed.
- B. The first system to be updated will assume the Active role.
- C. This is not possible since both systems are updated simultaneously.
- D. The older system will issue SNMP traps indicating a communication error with the partner.
Answer: A
NEW QUESTION 10
Assuming that systems are synchronized, which action could take place if the fail over cable is connected correctly and working properly, but the systems cannot communicate over the network due to external network problems?
- A. If network failover is enabled, the standby system will assume the active mode.
- B. Whether or not network failover is enabled, the standby system will stay in standby mode.
- C. Whether or not network failover is enabled, the standby system will assume the active mode.
- D. If network failover is enabled, the standby system will go into active mode but only until the network recovers.
Answer: B
NEW QUESTION 11
An IT support engineer needs to access and modify Virtual Servers in three partitions (Common /Banking and Dev) daily on a BIG-IP device. The company operates a Least Privilege access policy. What level of access does the IT support engineer need to ensure completion of daily roles?
- A. Manager in /common/Banking, and /Dev partitions
- B. Application Editor in /Common, /Banking, and /Dev partitions
- C. Manager in all partitions
- D. Application Editor in all partitions
Answer: A
NEW QUESTION 12
Which two can be a part of a virtual server's definition? (Choose two.)
- A. rule(s)
- B. pool(s)
- C. monitor(s)
- D. node address(es)
- E. loadbalancing method(s)
Answer: AB
NEW QUESTION 13
Which three methods can be used for initial access to a BIG-IP system? (Choose three.)
- A. CLI access to the serial console port
- B. SSH access to the management port
- C. SSH access to any of the switch ports
- D. HTTP access to the management port
- E. HTTP access to any of the switch ports
- F. HTTPS access to the management port
- G. HTTPS access to any of the switch ports
Answer: ABF
NEW QUESTION 14
Given that VLAN failsafe is enabled on the external VLAN and the network that the active BIG-IP's external VLAN is connected to has failed, which statement is always true about the results?
- A. The active system will note the failure in the HA table.
- B. The active system will reboot and the standby system will go into active mode.
- C. The active system will failover and the standby system will go into active mode.
- D. The active system will restart the traffic management module to eliminate the possibility that BIG-IP is the cause for the network failure.
Answer: A
NEW QUESTION 15
A BIG-IP device has only LTM and ASM modules provisioned. Both have nominal provisioning level. The BI6-IP Administrator wants to dedicate more resources to the LTM module. The ASM module must remain enabled. Which tmsh command should the BIG-IP Administrator execute to obtain the desired result?
- A. modify/sys provision asm level minimum
- B. modify /sys provision Itm level dedicated
- C. modify /sys provision asm level none
- D. modify /sys provision Itm level minimum
Answer: A
NEW QUESTION 16
Which statement describes a typical purpose of iRules?
- A. iRules can be used to add individual control characters to an HTTP data stream.
- B. iRules can be used to update the timers on monitors as a server load changes.
- C. iRules can examine a server response and remove it from a pool if the response is unexpected.
- D. iRules can be used to look at client requests and server responses to choose a pool member to select for load balancing
Answer: A
NEW QUESTION 17
......
P.S. Certshared now are offering 100% pass ensure 201 dumps! All 201 exam questions have been updated with correct answers: https://www.certshared.com/exam/201/ (254 New Questions)