A Review Of Breathing NS0-184 Pdf Exam

NEW QUESTION 1
On which type of network interfaces are the cluster interconnect LIFs created?

• A. on an FC or FCoE port
• B. on an interface group
• C. on a UTA port shared with other LIFs
• D. on a physical port

Answer: B

NEW QUESTION 2
Click the Exhibit button.

Referring to the numbers shown in the exhibit, which port on an AFF A220 controller is used as port e0M in
ONTAP?

• A. 4
• B. 3
• C. 2
• D. 1

Answer: A

NEW QUESTION 3
You have a 4-node ONTAP 9.8 cluster with a FAS8700 HA pair that serves iSCSI LUNs. You are adding a new AFF A250 HA pair to the cluster with new iSCSI SAN LIFs. You need to allow non-optimized data paths from the AFF A250 nodes to the existing LUNs on the FAS8700 nodes.
In this scenario, which two ONTAP configuration settings must you verify? (Choose two.)

• A. port sets
• B. switch zoning
• C. reporting nodes
• D. failover groups

Answer: AD

NEW QUESTION 4
During an installation of an AFF A400 cluster, you need to configure secure multitenancy. What will enable you to accomplish this task?

• A. failover groups
• B. VLANs
• C. broadcast domains
• D. IPspaces

Answer: D

NEW QUESTION 5
Acustomer wants to enable SnapMirror Synchronous across their environment. The customer must ensure that SnapMirror Synchronous will work across the environment.
In this scenario, which two statements are true? (Choose two.)

• A. ASnapMirrorlicenseisrequiredonboththesourceclusterandthedestinationcluster.
• B. ASnapMirrorSynchronouslicenseisrequiredonboththesourceanddestinationclusters.
• C. ASnapMirrorlicenseisnotrequiredonboththesourceclusterandthedestinationcluster.
• D. ASnapMirrorSynchronouslicenseisrequiredonthesourcecluster.

Answer: BC

NEW QUESTION 6
You installed a new 2-node FAS500f ONTAP 9.8 switchless cluster that serves NAS volumes to both
NFSv4.1 and SMB clients. The host operating systems have full flow control enabled on their data
ports.
In this scenario, which two flow control settings would you verify? (Choose two.)

• A. Verify thatthedatanetworkportshavefullflowcontroldisabled.
• B. Verifythattheclusternetworkportshavefullflowcontrolenabled.
• C. Verify thatthedatanetworkportshavefullflowcontrolenabled.
• D. Verifythattheclusternetworkportshavefullflowcontroldisabled.

Answer: AB

Explanation:
Reference: https://docs.netapp.com/us-en/ontap/pdfs/sidebar/Network_management.pdf

NEW QUESTION 7
You want to use the NetAppDocs tool to collect information on a newly configured ONTAP 9.8 cluster and to generate a Word document with the details of the cluster configuration.
Which two data sources would you use to collect the necessary data? (Choose two.)

• A. Active IQ Digital Advisor
• B. Active IQ Unified Manager
• C. ONTAP Cluster
• D. AutoSupport packages

Answer: BC

NEW QUESTION 8
What is a benefit of ONTAP System Manager?

• A. System Manager provides simplified management of service processor tasks.
• B. System Manager easily configures and provisions storage.
• C. System Manager easily configures and provisions StorageGRID.
• D. System Manager provides simplified management of E-Series.

Answer: B

NEW QUESTION 9
YouareinstallinganAFFA700systemwithtwodisk shelves usingADPv2.Aftersettingupthecluster, you
realize that one drive shelf was powered off and that the drives have not been assigned to any of the
nodes.
In this scenario, which two resources will help you find a solution? (Choose two.)

• A. Active IQ Config Advisor
• B. NetApp Documentation Center
• C. NetApp Knowledge Base
• D. Active IQ Digital Advisor

Answer: AC

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems/fas9000/install-detailedguide.html#option-1-cable-the-controllers-to-ds212c-or-ds224c-drive-shelves

NEW QUESTION 10
You want to enable secure communication with the SP or BMC through CA-signed certificates.
Which two certificate types must be installed in this scenario? (Choose two.)

• A. cluster certificate
• B. server certificate
• C. root CA certificate
• D. ONTAP certificate

Answer: BC

Explanation:
Reference:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/How_to_c
onfigure_communication_between_ONTAP_and_Service_Processor_(SP)_or_BMC_with_Certificate_
Authority_(CA)_signed_certificates

NEW QUESTION 11
Click the Exhibit button.

Which set of components on a FAS9000 are highlighted in the exhibit?

• A. FCVI-Module, Controller, Serial-Port, FlashCache-Module
• B. SAS-Module, Controller, USB-Port, FlashCache-Module
• C. NVRAM-Module, Controller, Serial-Port, FlashCache-Module
• D. Powersupply, Controller, USB-Port, NVRAM-Module

Answer: A

NEW QUESTION 12
You are preparing to add a 2-node AFF A250 system to an existing 4-node AFF A800 cluster with Cisco
Nexus 3232C switches. The cluster switches are currently running the Cluster-HA RCF.
In this scenario, which two steps are required to install the AFF A250 system? (Choose two.)

• A. Load the Storage RCF.
• B. Cable the AFF A250 nodes to the next free ports on the switch.
• C. Cable the AFF A250 nodes to the breakout ports on the switch.
• D. Load the Cluster-HA-Breakout RCF.

Answer: CD

NEW QUESTION 13
Click the Exhibit button.

After installation of a new ONTAP cluster, you experience a problem. You successfully create a support case on the NetApp Support site. The customer asks you how to view the status of the case.
Referring to the exhibit, which two steps would allow the customer to accomplish this task? (Choose two.)

• A. Open https://support.netapp.com, using the partner credentials.
• B. Open https://support.netapp.com, using the customer credentials.
• C. Open My Cases, and select the 41747189 case number.
• D. Open My Cases, and select Create a Case.

Answer: BC

Explanation:
Reference: https://mysupport.netapp.com/site/info/find-support

NEW QUESTION 14
You are adding new nodes to a 2-node switchless cluster. According to NetApp, what must you do before adding the nodes?

• A. You must configure cluster peering.
• B. must install interconnect switches.
• C. You must configure vserver peering.
• D. You must enable a cluster HA

Answer: B

NEW QUESTION 15
You are preparing for the installation of a new 2-node switchless AFF A250 ONTAP 9.8 cluster and
need to obtain the preinstallation information from the customer.
In this scenario, what are three examples of data required from the customer? (Choose three.)

• A. management IP addresses
• B. cluster switch name
• C. gateway IP address
• D. BMC IP addresses
• E. cluster name

Answer: ABD

Explanation:
Reference: https://docs.netapp.com/us-en/ontap-systems/a250/install-detailed-guide.html#step-1-
prepare-for-installation

NEW QUESTION 16
Click the Exhibit button.

During an ONTAP cluster handover procedure, your customer asks how to identify and solve issues
that might occur on the newly deployed array.
Referring to the exhibit, which two widgets would the customer use to help with these issues?
(Choose two.)

• A. Guide Me
• B. Active IQ
• C. Contracts and Warranties
• D. ASE Corner

Answer: AC

NEW QUESTION 17
Data ONTAP 9 supports which three features? (Choose three.)

• A. SMB 3.0
• B. NFSv2
• C. SnapMirror
• D. Infinite Volumes

Answer: ACD

NEW QUESTION 18
You installed two separate clusters in an isolated data center without outbound network
access. The customer wants to troubleshoot issues locally and also create custom Excel reports for
capacity utilization from a local server.
In this scenario, which NetApp tool would satisfy this requirement?

• A. Active IQ Digital Advisor
• B. Cloud Insights
• C. ONTAP System Manager
• D. Active IQ Unified Manager

Answer: D

NEW QUESTION 19
......