Breathing NS0-159 Interactive Bootcamp 2021

NEW QUESTION 1
An administrator encountered a ransomware attack that affected the active file system datA. They have been creating Snapshot copies on an hourly schedule. They determine that the entire volume needs to be recovered.
In this scenario, which command would you use?

• A. volume snapshot restore
• B. volume snapshot modify
• C. volume snapshot create
• D. volume snapshot delete

Answer: A

NEW QUESTION 2
You have a new cluster and must create a LIF on a port that uses LACP and VLAN. What is the correct order of network tasks that are required before you create the LIF?

• A. ifgroup -> VLAN -> add port to broadcast domain
• B. VLAN -> ifgroup -> add port to broadcast domain
• C. add port to broadcast domain – ifgroup -> VLAN
• D. add port to broadcast domain -> VLAN -> ifgroup

Answer: A

NEW QUESTION 3
You create a quality of service (QoS) policy group called untest_apps with a maximum throughput of 300 MBps. You add one volume to the policy group, and then you add a second volume to the policy group.
In this scenario, which statement is true?

• A. The maximum throughput of each volume is 600 MBps.
• B. The combined maximum throughput of both volumes is 600 MBps.
• C. The maximum throughput of each volume is 150 MBps.
• D. The combined maximum throughput of both volumes is 300 MBps.

Answer: D

NEW QUESTION 4
Click the Exhibit button.

While troubleshooting performance issues, you notice that only one port in the NetApp interface group a0a is actively sending or receiving data.
Referring to the exhibit, what should you do to ensure that both ports in the interface group are actively used?

• A. Change the distribution function to ip.
• B. Verify that the network switch has flow-control enabled.
• C. Change the interface group mode to multimode_lacp.
• D. Verify that the physical cabling is properly connected to ensure a network link.

Answer: C

NEW QUESTION 5
Which privilege is assigned to the vsadmin-backup role?

• A. managing volumes
• B. managing Snapshot copies
• C. configuring LIFs for cluster peering
• D. configuring SnapMirror relationships between clusters

Answer: D

NEW QUESTION 6
Click the Exhibit button.

Assuming that the export policy on the storage allows access, you want to enable client access to the finance volume in the departments SVM in the /tmp/fin directory.
Referring to the exhibit, which UNIX command must be executed to accomplish this task?

• A. mount –t nfs –o nfsvers=3 cluster01:/finance /tmp/fin
• B. mount –t nfs –o nfsvers=3 cluster01:/fin /tmp/fin
• C. mount –t nfs –o nfsvers=3 cluster01:/dept/fin /tmp/fin
• D. mount –t nfs –o nfsvers=3 cluster01:/departments/finance /tmp/fin

Answer: D

NEW QUESTION 7
In an aggregate with only thick-provisioned volumes, you need to split a FlexClone volume from its parent volume. There are other volumes in the aggregate.
In this scenario, how much space must be available within the containing aggregate?

• A. You need enough space for twice the size of the parent volume.
• B. The split FlexClone volume must be created in a new aggregate.
• C. You need enough space for half the size of the parent volume.
• D. You need to double the space in the existing aggregate.

Answer: A

NEW QUESTION 8
What are two security types available for NFSv3 shares? (Choose two.)

• A. mixed
• B. Kerberos v5
• C. AUTH_SYS
• D. unified

Answer: BC

NEW QUESTION 9
You want to configure Active Directory authentication for a cluster. You have performed the following actions:
- created the SVM,
- joined the SVM to Active Directory,
- created the domain tunnel.
You attempt to log in to the cluster as an Active Directory user but access is denied. How would you solve this problem?

• A. Create a custom role that allow Active Directory tunneling.
• B. Create a cluster user account with the same username and password as the Active Directory user.
• C. Create an Active Directory user account on the cluster.
• D. Create a cluster user account within Active Directory.

Answer: C

NEW QUESTION 10
You want to enable jumbo frames for iSCSI traffic on your cluster. To satisfy this requirement, what would you modify on the cluster?

• A. broadcast domains
• B. igroups
• C. iSCSI LIFs
• D. network ports

Answer: A

NEW QUESTION 11
Which two objects are supported in a FlexVol volume? (Choose two.)

• A. gtree
• B. LUN
• C. RAID group
• D. aggregate

Answer: AB

NEW QUESTION 12
When a cluster is created, which two objects are required to provide management access? (Choose two.)

• A. data LIFs
• B. data SVM
• C. management LIFS
• D. admin SVM

Answer: CD

NEW QUESTION 13
Which two LIF role types allow LIF migration among nodes? (Choose two.)

• A. cluster management
• B. node management
• C. intercluster
• D. data

Answer: AD

NEW QUESTION 14
Where would you look to find the minimum and the maximum number of array LUNs supported by FlexArray?

• A. OneCollect
• B. Config Advisor
• C. Hardware Universe
• D. Interoperability Matrix Tool (IMT)

Answer: C

NEW QUESTION 15
A storage administrator has a Linux Oracle database that is using a SAN configuration with multiple dualported FC HBA connections for path resiliency and performance. The HBA ports are configured to separate FC switches.
Before configuring the LUNs from the storage, what information must be obtained from the host? (Choose three.)

• A. the status of ALUA
• B. the WWPNs of all of the FC ports installed
• C. the speed of the FC ports of the host HBAs
• D. the status of the multipathing driver
• E. the amount of cache memory installed

Answer: BCD

NEW QUESTION 16
Which NetApp tool indicates whether you have applied data protection policies to all volumes?

• A. OnCommand Unified Manager
• B. Config Advisor
• C. Virtual Storage Console
• D. OnCommand Service Level Manager

Answer: A

NEW QUESTION 17
On which two types of ports would data LIFs be hosted? (Choose two.)

• A. physical ports or interface groups that host VLANs
• B. physical ports that are not part of interface groups
• C. console RJ45 port
• D. management e0M port

Answer: AB

Explanation:
hysical ports that are not part of interface groupsInterface groupsVLANsPhysical ports or interface groups that host
VLANshttps://library.netapp.com/ecmdocs/ECMP1636021/html/GUID-039A758B-E5A3-4085-B808-8573E55

NEW QUESTION 18
Click the Exhibit button.

Referring to the exhibit, which physical are hosting the cluster interconnect interfaces on the nodes in Cluster1?

• A. e0a and e0e
• B. e0a and e0b
• C. e0b and e0c
• D. e0c and e0a

Answer: B

NEW QUESTION 19
You create a Snapshot copy of a new volume.
Which activity increases the size of the new Snapshot copy?

• A. deleting data that was written to the volume after the Snapshot copy was created
• B. writing new data to the volume after the Snapshot copy was created
• C. reading data that was written to the volume before the Snapshot copy was created
• D. deleting data that was written to the volume before the Snapshot copy was created

Answer: D

NEW QUESTION 20
Click the Exhibit button.

You have a 4-node NetApp SAN cluster configured as shown in the exhibit.
By default, how many LUN paths does the host see for a newly created LUN on Node 01?

• A. 2
• B. 1
• C. 8
• D. 4

Answer: D

NEW QUESTION 21
You have an 8-node cluster and need to test a ping to all cluster interconnect ports between all of the eight in one command.
Which advanced command would accomplish this task?

• A. cluster ping-cluster
• B. network ping6
• C. network ping
• D. cluster peer ping

Answer: A

NEW QUESTION 22
A customer requires that their data is fully protected from theft, both at the volume layer and at the disk layer. Which two features of ONTAP satisfy this requirement? (Choose two.)

• A. Kerberos
• B. NetApp Volume Encryption
• C. Challenge Handshake Authentication Protocol
• D. NetApp Storage Encryption

Answer: BD

NEW QUESTION 23
A storage administrator moves a LUN from one volume to another. In this scenario, what is left behind in the volume?

• A. clones of the LUN
• B. LUN geometry settings
• C. all of the deduplicated blocks from the base LUN
• D. Snapshot copies of the volume

Answer: C

NEW QUESTION 24
Where would a cluster administrator move a FlexVol volume using the volume move command?

• A. to aggregates on other nodes in the cluster
• B. only to an aggregate on the partner node
• C. to any node that does not host a SnapMirror of the same FlexVol
• D. to another SVM in the cluster

Answer: A

NEW QUESTION 25
......