A Review Of Validated HPE0-S60 Exam Question

NEW QUESTION 1
You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group
What should you check to fix the issue?

• A. if both FiexNICs are configured with the same speed
• B. If the logical enclosure is built on at least three HPE Synergy frames
• C. if both FiexNICs are connected to different networks
• D. if the logical enclosure is configured with redundant master modules

Answer: A

NEW QUESTION 2
Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- two HPE Synergy Virtual Connect SE 32Gb FC Modules -12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards
They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- two HPE Synergy 20Gb interconnect Link Modules
- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cards Which statement about the planned configuration change is true?

• A. Four compute modules must be moved to the second frame to balance the configuration
• B. The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option
• C. A license for an extended logical enclosure must be added to HPE OneView through GUI
• D. The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked

Answer: D

NEW QUESTION 3
Which statement about HPE OneView milestone releases is true?

• A. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
• B. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
• C. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
• D. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.

Answer: A

NEW QUESTION 4
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They plan to use Distributed Switches and DRS cluster
You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each compute node
- one HPE D3940 Storage Modules with 40 SSDs - all required cables and options Which statement about this proposal is true?

• A. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
• B. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
• C. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
• D. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.

Answer: B

NEW QUESTION 5
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?

• A. It is equipped with HPE Persistent memory by default
• B. It can support a single processor only and up to 4 per chassis
• C. It is fully managed using HPE OneView including all connections
• D. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs

Answer: B

NEW QUESTION 6
You plan to configure a Link Aggregation Group (LAG) for two connections within a server profile for a compute node running an ESXI system.
What is required from the VMware side to enable LAG?

• A. Virtual Distributed Switch
• B. vSphere Standard license
• C. Load balancing cluster
• D. Dedicated VMKernel port

Answer: D

NEW QUESTION 7
Your customer wants to compare HPE Superdome Flex with HPE Superdome Flex 280. Which statement about these two systems is true?

• A. Only HPE Superdome Rex 280 can be managed using HPE OneView
• B. Only HPE Superdome Flex supports HPE Persistent Memory
• C. Only HPE Superdome Flex 280 can support multiple nPars
• D. Only HPE Superdome Flex supports 32 sockets and 48TB of memory

Answer: A

NEW QUESTION 8
Your customer needs to move an application from an HPE Synergy 480 Gen10 Compute Module to an HPE Synergy 660 Gen 10 Compute Module. The 480 has a switch that has been manually zoned outside of HPE OneView.
What must the customer do before migrating the application?

• A. Migrate the application to a Logical JBOD and connect it to the new server
• B. Copy the server profile and assign the clone to the new hardware
• C. Edit the server profile and change server hardware type
• D. Create a new server profile template and apply to the new hardware

Answer: C

NEW QUESTION 9
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets
Which HPE compute system meets the customer requirements?

• A. HPE ProLiant DL580 Gen10
• B. HPE ProLiant OL380 Gen 10 Plus
• C. HPE Synergy 480 Gen10 Plus
• D. HPE Superdome Flex system

Answer: C

NEW QUESTION 10
Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which components must be included in the proposal to meet the customer’s needs?

• A. Rack Management Controller for nPar management
• B. HPE Superdome Flex Grid licenses enabling connectivity between chassis
• C. At least Tour HPE Persistent Memory DIMMs per nPar
• D. One base chassis and three expansion chassis with licenses

Answer: D

NEW QUESTION 11
Match HPE SimpliVity term with the definition.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 12
Which statement about a new HPE SimpliVity deployment is true?

• A. New HPE SimpliVity deployments gives customer flexible choice of hypervisor
• B. A new HPE SimpliVity node can be a member of multiple dusters
• C. AM new HPE SimpliVity models are software optimized
• D. All new HPE SimpliVity models are based on mid CPUs

Answer: C

NEW QUESTION 13
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?

• A. Disable deduplication for this volume at the array level
• B. Remove the offline disks using array management tools
• C. Install and configure MPIO on me Windows system
• D. Remove the offline disks using Windows Disk Management

Answer: C

NEW QUESTION 14
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 15
Your customer has the following HPE Synergy setup:
- 15 HPE Synergy 12000 frames with 50Gb connectivity to each server port
- 2 HPE Composer 2 modules
- 15 HPE D3940 Storage Modules, one per frame
- 2 HPE 12Gb SAS switches per frame Which statement about this setup is true?

• A. The customer must create at least five logical enclosures for this setup.
• B. To manage 15 frames, additional HPE Composers are required.
• C. The customer can install up to 12 HPE Synergy 480 compute nodes per frame.
• D. If properly cabled, any compute node can access any HPE D3490 storage module

Answer: A

NEW QUESTION 16
Which statement about a new HPE SimpliVity deployment is true?

• A. New HPE SimpliVity deployments give customer flexible choice of hypervisor
• B. All new HPE SimpliVity models are based on AMD CPUs
• C. All new HPE SimpliVity models support deduplication and compression
• D. New HPE SimpliVity deployments are licensed per node not per physical socket

Answer: C

NEW QUESTION 17
Which statement about an HPE Oneview support dump is true?

• A. Appliance support dump by default contains a logical enclosure support dump
• B. Support dump is a binary file that can be opened only in a dedicated application
• C. Support dump can be created if HPE Virtual Connect modules are installed in the frame
• D. Preview support dump is available only when creating an appliance support dump

Answer: B

NEW QUESTION 18
......