Vivid H12-311 Vce 2021
we provide Practical HUAWEI H12-311 test engine which are the best for clearing H12-311 test, and to get certified by HUAWEI HCNA-WLAN - Wireless Local Area Network. The H12-311 Questions & Answers covers all the knowledge points of the real H12-311 exam. Crack your HUAWEI H12-311 Exam with latest dumps, guaranteed!
Check H12-311 free dumps before getting the full version:
NEW QUESTION 1
After a wireless user connects to a wireless signal point, they cannot obtain an IP address. What are the possible reasons (Select 2 Answers)?
- A. The DHCP server is not configured in the VLAN where the user is locate
- B. The dhcp-enable command is not configured on the
- C. wlan-ess virtual interface.
- D. The user-specified authentication password is incorrect.
- E. The MAC address of the user device has been added to the blacklis
Answer: AB
NEW QUESTION 2
Antennas are classified by direction and can be classified into antennas and antennas (Select 2 Answers).
- A. plate shape
- B. parabologd
- C. omnidirectional
- D. orientation
Answer: D
NEW QUESTION 3
Which of the following 2.4GHz bands are Selective Answers (ABD) (Select 3 Answers).
- A. 6 and 11
- B. 3 and 8
- C. 4 and 8
- D. 4 and 10
Answer: ABD
NEW QUESTION 4
A company wants to deploy WLAN. The company has purchased a number of wireless APs that support 802.11n. When the WLAN is deployed, only 802.11n wireless clients can connect to the company's WLAN.
- A. True
- B. False
Answer: B
NEW QUESTION 5
What are the rates that 802.11a can support?
- A. 6,12,24,54 Mbps
- B. 6,9,12,18,24,36,48,54 Mbps
- C. 6,12,18,24,36,48,54 Mbps
- D. 6,9,12,18,24,30,36,48,54 Mbps
Answer: B
NEW QUESTION 6
The following description of the management VLAN is correct.
- A. Mainly responsible for transmitting data when WLAN users access the Internet
- B. PVID VLAN under WLAN ESS interface
- C. Service VLAN under the service set template
- D. Responsible for establishing the CAPWAP tunnel between the AC and the AP.
Answer: D
NEW QUESTION 7
Which channels in the 802.11b protocol do not overlap each other (Select 3 Answers)?
- A. 1
- B. 3
- C. 6
- D. 11
Answer: ACD
NEW QUESTION 8
When the AC is a side-by-side networking, if the data is directly forwarded, the data stream () AC; if the data is in tunnel forwarding mode, the data Stream AC.
- A. No pass, pass
- B. No pass, no pass
- C. After passing through
- D. After passing through not
Answer: A
NEW QUESTION 9
Telnet is one of the ways to remotely manage APs. You can configure telnet authentication based on username and password.
- A. True
- B. False
Answer: A
NEW QUESTION 10
In the process of discovering the AC by the thin AP, the first step is to check whether there is a list of pre-configured static AC IP addresses.
- A. True
- B. False
Answer: A
NEW QUESTION 11
Because 802.11a supports the same maximum rate as 802.11g supports, the 802.11a protocol is backward compatible with the 802.11g protocol.
- A. True
- B. False
Answer: B
NEW QUESTION 12
Configure the security profile of the wireless network as WEP. You need to configure the security profile on the AC6605 as follows.
- A. security-policy wepWep authentication-method open Wep key wep-40 hex 0 1234567890Wep default-key 0
- B. security-policy wep Policy wep share-keyWep key wep-40 hex 0 1234567890Wep default-key 0
- C. authentication policy wpaWpa authentication-method share-key Wpa key wpa-40 hex 0 1234567890Wpa default-key 0
- D. authentication policy wpa2Wpa2 authentication-method share-key Wpa2 key wpa2-40 hex 0 1234567890Wpa2 default-key 0
Answer: B
NEW QUESTION 13
A point-to-point wireless bridge can be used to connect two networks that are located at different locations. In a wireless backbone connection, the Root AP and the Leaf AP should be set to different channels.
- A. True
- B. False
Answer: B
NEW QUESTION 14
When deploying APs on multiple floors of a building, the factor to be aware of is (Select 3 Answers).
- A. Material of the wall
- B. Other interference signals
- C. In order not to affect the appearance, the AP should be hidden in the ceiling
- D. Unified planning channel
Answer: ABD
NEW QUESTION 15
What are the general methods for solving co-channel interference (ABD) (Select 3 Answers).
- A. Adjust AP transmit power and adjust antenna feed
- B. Reasonable frequency reuse to ensure that the same channel does not appear in the same or adjacent coverage area
- C. Multi-directional coverage using omnidirectional antennas
- D. Natural isolation using obstacles
Answer: ABD
NEW QUESTION 16
What is the network consisting of a wireless AP and associated wireless clients?
- A. IBSS
- B. BSS
- C. ESS
- D. NSS
Answer: B
NEW QUESTION 17
What type of frame does the ACK frame belong to in the WLAN?
- A. Management frame
- B. Control frame
- C. Data frame
- D. Empty data frame
Answer: B
NEW QUESTION 18
The following is an incorrect way to refer to AP access control (Select 2 Answers).
- A. By default, the access control mode of the AP to the AC is not authenticated.
- B. By configuring the AP in the offline state, authentication is required to automatically access the AP.
- C. The configuration whitelist can be authenticated based on the MAC or authenticated based on the SN.
- D. If the AP access control adopts MAC authentication, the AP outside the MAC authentication list can also be online after being manually confirmed.
Answer: AB
NEW QUESTION 19
What are the mandatory standards for wireless LAN security in China?
- A. WiFi
- B. WAPI
- C. WLAN
- D. WiMAX
Answer: B
NEW QUESTION 20
In the 802.1X protocol, you must have the ability to authenticate and authorize users (Select 3 Answers).
- A. eSight server
- B. client
- C. certifier
- D. authentication server
Answer: B.CD
NEW QUESTION 21
What are the main contents of the CAPWAP protocol (Select 3 Answers)?
- A. AP automatic discovery of AC and state machine operation and maintenance of AP&AC
- B. The AC manages the AP and delivers the service configuration.
- C. STA data encapsulates CAPWAP tunnel for forwarding
- D. Define the transfer rate of the Mac layer and the physical layer
Answer: ABC
NEW QUESTION 22
Each AC device needs to specify the source IP address of the AC to establish a CAPWAP tunnel with the AP. One AC can specify up to two WLAN source IP addresses.
- A. True
- B. False
Answer: B
NEW QUESTION 23
The following description of the splitter and coupler is correct .
- A. Power splitter and coupler are equal power allocation
- B. Power splitter is equal power distribution, coupler is unequal power distribution
- C. Power splitter is unequal power distribution, coupler is equal power distribution
- D. Power splitter and coupler are unequal power distribution
Answer: B
NEW QUESTION 24
Authentication is not related to the authentication encryption used by the WLAN itself when it is used by the WLAN.
- A. True
- B. False
Answer: B
NEW QUESTION 25
What is the US non-overlapping channel in the 2.4 GHz band?
- A. 2 , 7, 12
- B. 3, 8, 13
- C. 1, 6, 11
- D. 3, 7, 13
Answer: C
NEW QUESTION 26
To create a user for Huawei's AC, first use the aaa command to enter the view.
- A. True
- B. False
Answer: A
NEW QUESTION 27
If an AP has been added offline, the AP can go online directly.
- A. True
- B. False
Answer: A
NEW QUESTION 28
The MEth0/0/1 interface on the AC6605 is used for inband network management. The default address is 192.168.1.1/24 and cannot be modified.
- A. True
- B. False
Answer: B
NEW QUESTION 29
......
Recommend!! Get the Full H12-311 dumps in VCE and PDF From 2passeasy, Welcome to Download: https://www.2passeasy.com/dumps/H12-311/ (New 298 Q&As Version)