Refined 70-741 Rapidshare 2021

NEW QUESTION 1
You plan to deploy several Hyper-V hosts that run Windows Server 2021. The deployment will use Software defined Networking (SDN) and VXLAN.
Which server role should you install on the network to support the planned deployment?

• A. Network Controller
• B. Network Policy and Access Services
• C. Remote Access
• D. Host Guardian Service

Answer: A

NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.
Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.
You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that all of the Windows 10 computers can receive a DHCP lease. Solution: You increase the scope size.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
https://technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx

NEW QUESTION 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2021. You need to identify whether SR-IOV is used by VM1.
Solution: You sign in to VM1. You view the properties of the network connections. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 4
You have servers named Server1 and DHCP1. Both servers run Windows Server 2021. DHCP1 contains an IPv4 scope named Scope1.
You have 1,000 client computers.
You need to configure Server1 to lease IP addresses for Scope1. The solution must ensure that Server1 is used to respond to up to 30 percent of the DHCP client requests only.
You install the DHCP Server server role on Server1. What should you do next?

• A. From the DHCP console, run the Configure Failover wizard.
• B. From Server Manager, install the Network Load Balancing feature.
• C. From Server Manager, install the Failover Clustering feature.
• D. From the DHCP console, create a superscope.

Answer: A

Explanation:
https://technet.microsoft.com/en-us/library/hh831385(v=ws.11).aspx

NEW QUESTION 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2021. You need to identify whether SR-IOV is used by VM1.
Solution: You sign in to VM1. You run the Get-NetAdapterSriov cmdlet.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/powershell/module/netadapter/get-netadaptersriov?view=win10-ps

NEW QUESTION 6
You have a DHCP server named Server1 that runs Windows Server 2021. You plan to implement IPv6 on your network.
You need to configure Server1 for stateless DHCPv6. What should you do from the DHCP console?

• A. Configure the Advanced Properties for Server1
• B. Configure the IPv6 Server Options
• C. Create an IPv6 scope
• D. Configure the General IPv6 Properties

Answer: B

NEW QUESTION 7
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2021.
Users report that their client computers fail to obtain an IP address.
You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)

Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.
You need to ensure that all of the client computers on the network can obtain an IP address from Server2. Solution: You run the Set-DhcpServerv4MulticastScope cmdlet.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 8
You have multiple servers that run Windows Server 2021.
You need to install the DNS Server server role on one of the servers. What should you run?

• A. dism.exe
• B. dns.exe
• C. dnscmd.exe
• D. netsh.exe
• E. Set-DhcpServerDatabase
• F. Set-DhcpServerv4DnsSetting
• G. Set-DhcpServerv6DnsSetting
• H. Set-DNSServerSetting

Answer: A

NEW QUESTION 9
Your network contains an Active Directory domain named contoso.com that contains a domain controller named DC1. All DNS servers for the network run BIND 10.
Your perimeter network contains a DHCP server named DHCP1 that runs Windows Server 2021. DHCP1 is a member of a workgroup named WORKGROUP. DHCP1 provides IP address leases to guests accessing the Wi-Fi network.
Several engineers access the network remotely by using a VPN connection to a remote access server that runs Windows Server 2021. All of the VPN connections use certificate-based authentication and are subject to access policies in Network Policy Server (NPS). Certificates are issued by an enterprise certification authority (CA) named CA1.
All Windows computers on the network are activated by using Key Management Service (KMS). On-premises users use Remote Desktop Services (RDS).
You plan to deploy IP Address Management (IPAM) to the network. Which action can you perform on the network by using IPAM?

• A. Audit user and device logon event from NPS.
• B. Audit logon events on the RDS server.
• C. Audit configuration changes to the remote access server.
• D. Audit certificate enrollment requests on CA1.

Answer: A

Explanation:
References:
https://blogs.technet.microsoft.com/canitpro/2013/08/15/step-by-step-setup-windows-server-2012-ipam-in-your-

NEW QUESTION 10
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2021 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.
All client computers dynamically register their names in the contoso.com DNS zone on Server1.
You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.
You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.
Solution: You set the Expires after value of the zone. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
https://technet.microsoft.com/en-us/library/cc772069(v=ws.11).aspx

NEW QUESTION 11
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named adatum.com. The domain contains two DHCP servers named Server1 and Server2.
Server1 has the following IP configuration.

Server2 has the following IP configuration.

Some users report that sometimes they cannot access the network because of conflicting IP addresses. You need to configure DHCP to avoid leasing addresses that are in use already.
Solution: On Server1, you modify the EndRange IP address of the scope. Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 12
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 that runs Windows Server 2021.
Server2 has 10 IPv4 scopes.
You need to ensure that the scopes are backed up every 30 minutes to the folder D:DHCPBackup. What should you run?

• A. dism.exe
• B. dns.exe
• C. dnscmd.exe
• D. netsh.exe
• E. Set-DhcpServerDatabase
• F. Set-DhcpServerv4DnsSetting
• G. Set-DhcpServerv6DnsSetting
• H. Set-DNSServerSetting

Answer: E

NEW QUESTION 13
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.
You create a domain user account named User1.
You need to ensure that User1 can use IPAM to manage DHCP.
Which command should you run on Server1? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 14
Your network contains an Active Directory domain named contoso.com. The domain contains a domain-based Distributed File System (DFS) namespace named Namespace1.
You need to view the shares to which users will be redirected when the users attempt to connect to a folder named Folder1 in the DFS namespace.
What cmdlet should you run? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 15
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2021.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the Deployment Server role service, and then you restart the World Wide Web Publishing Service.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 16
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
Server1 has IP Address Management (IPAM) installed. Server2 has Microsoft System Center 2021 Virtual Machine Manager (VMM) installed.
You need to integrate IPAM and VMM.
Which types of objects should you create on each server? To answer, drag the appropriate object types to the correct servers. Each object type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx

NEW QUESTION 17
You have a network address translation (NAT) server named NAT1 that has an external IP address of 131.107.50.1 and an internal IP address of 10.0.0.1.
You deploy a new server named Web1 that has an IP address of 10.0.0.211.
A remote server named app.fabrikam.com has an IP address of 131.107.1.232. You need to make Web1 accessible to app.fabrikam.com through NAT1.
What command should you run from NAT1? To answer, select the appropriate options in the answer area.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
https://technet.microsoft.com/en-us/itpro/powershell/windows/nat/add-netnatstaticmapping

NEW QUESTION 18
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1 that runs Windows Server 2021.
You have a DHCP scope for the 10.0.0.0/24 IP subnet. One hundred and fifty clients reside in the subnet. Fifty of the DHCP clients are NOT domain-joined.
You need to ensure that DHCP clients without a configured DNS suffix register automatically in a DNS zone named workgroup.contoso.com. The other DHCP clients must register in the DNS zone of their respective domain.
What should you do?

• A. Configure the DNS properties of the 10.0.0.0/24 DHCP scope.
• B. Create a DHCP policy that has a condition based on the fully qualified domain name (FQDN) criterion.Configure the IP address range properties of the policy.
• C. Create a DHCP policy that has a condition based on the fully qualified domain name (FQDN) criterion.Configure the DNS properties of the policy.
• D. Configure the 015 DNS Domain Name scope option in the 10.0.0.0/24 DHCP scope.

Answer: C

NEW QUESTION 19
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named adatum.com. The domain contains two DHCP servers named Server1 and Server2.
Server1 has the following IP configuration.

Server2 has the following IP configuration.

Some users report that sometimes they cannot access the network because of conflicting IP addresses. You need to configure DHCP to avoid leasing addresses that are in use already.
Solution: On Server2, you modify the ConflictDetectionAttempts value for IPv4. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 20
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2021.
Users report that their client computers fail to obtain an IP address.
You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)

Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.
You need to ensure that all of the client computers on the network can obtain an IP address from Server2. Solution: You run the Repair-DhcpServerv4IPRecord cmdlet.
Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
https://technet.microsoft.com/itpro/powershell/windows/dhcp-server/set-dhcpserverv4scope

NEW QUESTION 21
Your company has a main office in London and a branch office in Seattle. The offices connect to each other by using a WAN link.
In the London office, you have a Distributed File System (DFS) server named FS1 that contains a folder named Folder1.
In the Seattle office, you have a DFS server named FS2. All servers run Windows Server 2021.
You configure replication of Folder1 to FS2.
Users in both offices frequently add files in Folder1.
You monitor DFS Replication, and you discover excessive replication over the WAN link during business hours.
You need to reduce the amount of bandwidth used for replication during business hours. The solution must ensure that the users can continue to save content to Folder1.
What should you do?

• A. Modify the quota settings on Folder1 on FS2.
• B. Modify the properties of the replication group.
• C. Configure the copy of Folder1 on FS2 as read-only.
• D. Modify the replicated folder properties of Folder1 on FS1.

Answer: B

NEW QUESTION 22
You have a server named Server1 that runs Windows Server 2021. Server1 will be used as a VPN server.
You need to configure Server1 to support VPN Reconnect. Which VPN protocol should you use?

• A. IKEv2
• B. L2TP
• C. PPTP
• D. SSTP

Answer: B

NEW QUESTION 23
Your network contains an Active directory forest named contoso.com. The forest has a Distributed File System (DFS) namespace named \contoso.comnamespace1.
The domain contains a file server named Server1 that runs Windows Server 2021. You create a folder named Folder1 on Server1.
You need to use Folder1 as a target for Namespace1.
Which two cmdlets should you use? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. New-DfsnFolderTarget
• B. Install-WindowsFeature
• C. Grant-DfsnAccess
• D. New-DfsnFolder
• E. New-SmbShare

Answer: AC

Explanation:
References:
https://docs.microsoft.com/en-us/powershell/module/dfsn/new-dfsnfoldertarget?view=win10-ps https://docs.microsoft.com/en-us/powershell/module/dfsn/grant-dfsnaccess?view=win10-ps

NEW QUESTION 24
Your company owns the public Internet IP address range of 131.107.20.0 to 131.107.20.255.
You need to create a subnet that supports four hosts. The solution must minimize the number of addresses available to the subnet.
Which subnet should you use?

• A. 131.107.20.16 with subnet mask 255.255.255.248
• B. 131.107.20.16/28
• C. 131.107.20.0/27
• D. 131.107.20.16/30

Answer: A

NEW QUESTION 25
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2021. Server1 is configured as a VPN server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Routing and Remote Access, You configure the Properties of Server1. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 26
You have Hyper-V host named Server1.
Server1 has a network adapter that has virtual machine queue (VMQ) enabled. The network adapter connects at 10 Gbps and has an IPv4 address.
Server1 hosts a virtual machine named VM1. VM1 has a single network adapter and four processors. You need to distribute the network processing load across the VM1 processors.
What should you do?

• A. From Device Manager on Server1, configure TCP Checksum Offload (IPv4).
• B. From Device Manager on VM1, configure TCP Checksum Offload (IPv4).
• C. From Device Manager on VM1, configure Receive Side Scaling.
• D. From Windows PowerShell on Server1, run the Enable-NetAdapterRSS cmdlet.

Answer: C

NEW QUESTION 27
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.

You need to ensure that all of the client computers in the domain perform DNSSEC validation for the fabrikam.com namespace.
Solution: From a Group Policy object (GPO) in the domain, you modify the Network List Manager Policies. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
Network List Manager Policies are security settings that you can use to configure different aspects of how networks are listed and displayed on one computer or on many computers.
Network List Manager Policies are not related to DNSSEC.
References: https://technet.microsoft.com/en-us/library/jj966256(v=ws.11).aspx

NEW QUESTION 28
......