Tested 70-333 Dumps Questions 2021

NEW QUESTION 1
You need to recommend a solution to test users’ ability to schedule, join, and conduct an audio/video (A/V) conference.
What should you do?

• A. Run the Test-CsAVConference Skype for Business Management Shell cmdlet and then analyze the trace call flow in Snooper.
• B. Run the Test-CsMcxConference Skype for Business Management Shell cmdlet and save the results.View the results by using the Skype for Business Server 2015 Logging Tool.
• C. Run the Test-CsUcwaConference Skype for Business Management Shell cmdlet.
• D. Run the Test-CsAudioConferencingProvider Skype for Business Management Shell cmdlet and save the result
• E. View the results by using the Central Logging Service.

Answer: A

Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/skype/test-csavconference?view=skype-ps

NEW QUESTION 2
You need to create the Unified Messaging (UM) dial plans and access numbers for subscriber access.
How many UM dial plans and access numbers should you create? To answer, select the appropriate number of UM dial plans and access numbers in the answer area.

Answer:

Explanation:

NEW QUESTION 3
Your company has a Skype for Business Server 2015 infrastructure.
All users are enabled for Enterprise Voice. All network components support the Link Layer Discovery Protocol (LLDP).
A client computer named Computer1 runs Windows 10. Computer1 connects to a wireless network connection and a wired network connection.
You need to locate Computer1.
Which element should you use to locate Computer1?

• A. the Basic Service Set Identification (BSSID) address of the wireless access point (WAP)
• B. the IP subnet of the wireless network
• C. the LLDP switch port
• D. the MAC addresses of the wired network connection
• E. the LLDP switch chassis ID

Answer: C

NEW QUESTION 4
You have a Skype for Business Server 2015 environment. All users are enabled for Enterprise Voice. You have a Microsoft Exchange Server 2013 organization that contains one server named EX01.
You plan to implement Unified Messaging (UM). From Skype for Business Management Shell, you run the following commands:
New-UMDialPlan-Name UMDialPlan-UriType “SipName” –VoipSecurity Secured
–NumberOfDigitsInExtension 4 ExchUCUtil.ps1
From Event Viewer, you discover the following error message when Skype for Business Server 2015 attempts to transfer a call to UM: “Attempts to route servers in an Exchange UM Dialplan failed. No server in the dialplan UMDialPlan accepted the call with id [03b5ba2bf7ec4663bc43e8e49c246634].
Cause: Dialplan is not configured properly.”
You need to ensure that the Enterprise Voice users can receive voice mail.
Which two actions should you perform? Each correct answer presents part of the solution.

• A. From the Exchange Management Shell, run the following command:New-UmAutoAttendant –name LyncAa –UmDialPlan LyncUMDialPlan –Status Enabled
• B. From the Exchange Management Shell, run the following command:Set-UmCallRouterSettings EX01–UmStartupMode Tls –DialPlans “UMDialPlan”
• C. Change the value of the VoipSecurity of the UMDialPlan from Secured to SipSecured.
• D. From the Exchange Management Shell, run the following command:Set-UmService EX01–UmStartupMode Tls –DialPlans “UMDialPlan”
• E. Change the value of the UriType property of the UMDialPlan from SipName to E.164.

Answer: AD

Explanation: References: https://technet.microsoft.com/en-gb/library/jj687983.aspx

NEW QUESTION 5
Your company has a Skype for Business Server 2015 infrastructure.
You need to ensure that users can answer calls placed to other users by using the Group Call Pickup feature.
Which Skype for Business Management Shell cmdlet should you run?

• A. New-CsDialPlan
• B. New-CsRoutingConfiguration
• C. New-CsCallParkOrbit
• D. New-CsVoiceRoutingPolicy

Answer: C

Explanation: References: https://technet.microsoft.com/en-us/library/jj945627.aspx

NEW QUESTION 6
You are developing a design solution to eliminate the possibility of wide area network (WAN) over-subscription by Skype for Business traffic.
You need to assign tasks to each office to prevent over subscription and to ensure quality.
Which tasks should you assign to each office? To answer, drag the appropriate task or tasks to the correct office or offices in the answer area. Each task may be used once, more than once, or not at all. You may need to drag the split bar between panels or scroll to view content.

Answer:

Explanation:

Topic 7, Mix Questions set

NEW QUESTION 7
You have a Skype for Business Server 2015 environment. You deploy the Edge server to the perimeter network.
Users cannot connect to Skype for Business by using mobile devices.
You need to identify the problem that is preventing the users from connecting to Skype for Business by using mobile devices.
Which two utilities should you use? Each correct answer presents a complete solution.

• A. Microsoft Remote Connectivity Analyzer
• B. Network Configuration Viewer
• C. The Debug-CsLisConfiguration cmdlet
• D. Microsoft Lync Connectivity Analyzer

Answer: AD

NEW QUESTION 8
Your network contains the servers shown in the following table.

You configure the infrastructure to use Exchange Unified Messaging (UM). You need to create a new contact object for the UM auto attendant.
What should you do?

• A. From Server1, run ocsumutil.exe.
• B. From Server1, run the New-CsExUmContact Skype for Business Management Shell cmdlet.
• C. From Server3, run the New-MailContact Exchange Management Shell cmdlet.
• D. From Server3, run the exchucutil.ps1 script.

Answer: D

Explanation: References:
http://blog.schertz.name/2015/10/skype-for-business-and-exchange-um-integration/

NEW QUESTION 9
You need to estimate the volume of Skype for Business traffic.
In the Skype for Business Calculator, which options should you select? To answer, select the appropriate branch site or sites in the Skype for Business Bandwidth Calculator.

Answer:

Explanation:

NEW QUESTION 10
Problem Statements
Two users who recently joined the company’s finance department report that they are not able to use their Aries phones even when they tether the phone to their computer.
You need to implement voice resiliency for international calls.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 11
You support a Skype for Business Server 2015 environment that consists of the following:
A single Skype for Business Server 2015 Standard Edition pool that is located in a main office.
Four branch offices that are connected by a 9 megabits per second (Mbps) dedicated wide area network (WAN) link, each of which has 300 users.
You need to be able to support 75 concurrent calls.
Users in the branch offices report poor quality audio during conferences. You perform the following troubleshooting steps:
Implemented Quality of Service (Qos) and Call Admission Control (CAC). In CAC, defined the main office and each branch office as a site In CAC, associated subnets to the relevant sites. Provisioned policy-based QoS for media traffic.
Poor audio quality persists.
You run the Skype for Business Management Shell Get-CsNetworkSite cmdlet. The relevant portion of the results are shown below:

You need to improve audio quality. What should you do?

• A. Create a region route to route network traffic between the CAC sites.
• B. Create a bandwidth policy profile with an Audio Session Limit of 40 Kbp
• C. Assign the profile to the centralsite.
• D. Create a bandwidth policy profile with an Audio Session Limit of 40 Kbps and an Audio Limit of 3 Mbps.Assign the profile to each branch site.
• E. Create a bandwidth policy profile with an Audio Session Limit of 40 Kbps and an Audio Limit of 1 Mbps.Assign the profile to each branch site.

Answer: C

Explanation: References: https://technet.microsoft.com/en-us/library/gg412785.aspx

NEW QUESTION 12
You have a Skype for Business Server 2015 infrastructure that has Enterprise Voice enabled.
When a caller dials an unassigned number, the caller hears a custom message, and then the caller is forwarded to a user named User1.
Several months later, User1 leaves the company.
You need to ensure that when a caller dials an unassigned number, the caller hears the custom message and is forwarded to a user named User2.
Which Skype for Business Management Shell cmdlet should you run?

• A. Set-CsUnassignedNumber
• B. Set-CsUser
• C. Set-CsVoiceRoute
• D. Set-CsAnnouncement

Answer: D

Explanation: References:
https://technet.microsoft.com/en-us/library/gg425752.aspx

NEW QUESTION 13
A company has several offices that are located in the office building in Seattle. The company also has employees visiting from other countries. You implement Skype for Business Server Enterprise Voice.
The company has a phone at a security desk. You need to implement call routing for emergency calls. The solution must meet the following requirements:
If a user dials 112, the call must be routed to a phone extension of 0911.
If a user dials 0911, the call must be routed to the phone at the security desk.
The phone at the security desk must be used to forward calls to the emergency number in the Seattle offices only.
What technologies should you implement? To answer, drag the appropriate technology to the correct requirement in the answer area. Each technology may be used once, more than once, or not at all. Additionally, you may need to drag the split bar between panes or scroll to view content.

Answer:

Explanation:

NEW QUESTION 14
You need to design the Quality of Service (QoS) configuration for the solution.
For each solution option, which port range should you use? To answer, select the appropriate port range from each list in the answer area.

Answer:

Explanation: All services can use ports 1024-65535. However, for QoS, we need to use port ranges that do not overlap.

NEW QUESTION 15
You need to design the Call Park solution.
Which Call Park design should you choose? To answer, select the appropriate range and application server in the dialog box in the answer area.

Answer:

Explanation:

NEW QUESTION 16
You collect the following call statistics for users in Los Angeles:
✑ Peak call concurrency is 25 percent.
✑ Fifty percent of all placed calls are routed to the public switched telephone network (PSTN)
✑ Thirty percent of all placed calls are internal calls to users in the other offices.
✑ Twenty percent of all placed calls are conference calls.
✑ The average bandwidth for peer-to-peer calls is 65 kilobits per second (Kbps).
✑ The average bandwidth used for conference calls is 100 Kbps.
You need to allocate the minimum amount of bandwidth required on the wide area network (WAN) link for the planned implementation of the voice gateway in the Los Angeles office. All calls to the PSTN will be routed through the local voice gateway in the Los Angeles office.
How much bandwidth in megabits per second (Mbps) should you allocate?

• A. 7.20 Mbps
• B. 3.95 Mbps
• C. 10.00 Mbps
• D. 2.25 Mbps

Answer: B

NEW QUESTION 17
You support a Microsoft Skype for Business Server 2015 on-premises environment that includes the following:
The environment supports 10,000 users and runs in High Availability mode.
Some users report that they are unable to make outbound calls to specific public switched telephone network (PSTN) numbers. When they attempt to do so, the call appears to be connected but then drops with a fast busy tone, and then they receive the following error message: “Due to network error your call cannot be completed at this time. Please try your call again.”
You need to troubleshoot the issue.
Which centralized logging scenario should you use?

• A. LYSSAndUCS
• B. HybridVoice
• C. MediaConnectivity
• D. IncomingAndOutgoingCall

Answer: D