Cisco 640-692 Prep 2021

We provide real 640-692 exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco 640-692 Exam quickly & easily. The 640-692 PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco 640-692 dumps pdf and vce product and material, you can easily pass the 640-692 exam.

Cisco 640-692 Free Dumps Questions Online, Read and Test Now.

NEW QUESTION 1
Which of the following CLI operating modes, by default, allow you to copy a Cisco IOS image to flash memory from TFTP server?

  • A. User EXEC
  • B. Privileged EXEC
  • C. FTP
  • D. Global configuration

Answer: B

NEW QUESTION 2
Which port displays the bootup process on a Cisco device?

  • A. ATM
  • B. BVI
  • C. Console
  • D. Ethernet

Answer: C

NEW QUESTION 3
Refer to the exhibit.
640-692 dumps exhibit
What is the result of setting the no login command?

  • A. Telnet access is denied.
  • B. Telnet access requires a new password at the first login.
  • C. Telnet access requires a new password.
  • D. no password is required for telnet access.

Answer: D

NEW QUESTION 4
Refer to the exhibit.
640-692 dumps exhibit
Which three statements correctly describe Network Device A? (Choose three.)

  • A. With a network wide mask of 255.255.255.128, each interface does not require an IP address.
  • B. With a network wide mask of 255.255.255.128, each interface does require an IP address on a unique IP subnet.
  • C. With a network wide mask of 255.255.255.0, must be a Layer 2 device for the PCs to communicate with each other.
  • D. With a network wide mask of 255.255.255.0, must be a Layer 3 device for the PCs to communicate with each other.
  • E. With a network wide mask of 255.255.254.0, each interface does not require an IP address.

Answer: BDE

NEW QUESTION 5
Which Ethernet interface command is present when you boot a new Cisco router for the first time?

  • A. speed 100
  • B. shutdown
  • C. ip address 192.168.1.1 255.255.255.0
  • D. duplex half

Answer: B

NEW QUESTION 6
At the interface configuration prompt, which command returns you to the main configuration prompt?

  • A. Ctrl-Z
  • B. end
  • C. exit
  • D. quit

Answer: C

NEW QUESTION 7
From a Windows command prompt, which command displays the local IP address of a computer?

  • A. ip config
  • B. ip configuration
  • C. ipconfig
  • D. ipconfiguration

Answer: C

NEW QUESTION 8
Which three pieces of information about a device can be seen from the show version command? (Choose three)

  • A. CPU load
  • B. Device model
  • C. Installed DRAM
  • D. Installed flash
  • E. Locally configured IP addresses

Answer: BCD

NEW QUESTION 9
Which two commands display the saved configuration file? (Choose two)

  • A. show configuration
  • B. show file system
  • C. show running-config
  • D. show startup-config

Answer: AD

NEW QUESTION 10
A null modem cable uses which adapter type?

  • A. RJ-11
  • B. RJ-45
  • C. RS-323
  • D. RS-232
  • E. USB

Answer: B

NEW QUESTION 11
What are two ways to open a command prompt session on a Windows-based computer? (Choose two)

  • A. Click Start > Control Panel > Command Prompt
  • B. Click Start > All Programs > Accessories > Command Prompt
  • C. Click Start > All Programs > Command Prompt
  • D. Click Start > Ru
  • E. Enter cmd and click OK
  • F. Click Start > All Programs > Accessories > Communications > Command Prompt

Answer: BD

NEW QUESTION 12
Which two of the following statements are true? (Choose two)

  • A. OEM products that are built for Cisco never get a Cisco logo applied.
  • B. The Cisco logo, old or new, can be found on the front bezel of all Cisco rack-mountable or desktop products.
  • C. Serial numbers are attached by label on all Cisco field-replaceable parts.
  • D. At the network module level, the model number is the same as the part number.

Answer: BD

NEW QUESTION 13
Refer to the exhibit.
640-692 dumps exhibit
Why is flash memory erased prior to upgrading the IOS image from the TFTP server?

  • A. The router cannot verify that the Cisco IOS image currently in flash is valid.
  • B. Flash memory on Cisco routers can contain only a single IOS image.
  • C. Erasing current flash content is requested during the copy dialog.
  • D. In order for the router to use the new image as the default, it must be the only IOS image in flash.

Answer: C

NEW QUESTION 14
Which router can be used for disk-in-access to the router CLI management purposes and does not usually pass normal network traffic?

  • A. AUX
  • B. Gigabit Ethernet
  • C. Fast Ethernet
  • D. Channelized serial

Answer: A

NEW QUESTION 15
Which statement describes the effect of the copy run start command on a router in enable mode?

  • A. The running configuration of the router is saved to NVRAM and used during the boot process.
  • B. The router reboots and loads the last saved running configuration.
  • C. A copy of the running configuration of the router is sent by FTP to a designated server.
  • D. A new running configuration is loaded from flash memory to the router.

Answer: A

NEW QUESTION 16
Which bits represent the boot field in the configuration register value?

  • A. highest two bits
  • B. highest four bits
  • C. lowest two bits
  • D. lowest four bits

Answer: D

NEW QUESTION 17
What does Cisco use for Return Materials Authorization (RMA) tracking of field-replaceable parts?

  • A. model number
  • B. product number
  • C. serial number
  • D. RMA number
  • E. FRU number

Answer: C

Explanation:
Cisco uses Serial Numbers for RMA tracking of field replaceable parts (FRU) and for service contract entitlement verification of devices.

NEW QUESTION 18
Refer to the exhibit.
640-692 dumps exhibit
What does the CD LED indicate on the voice WAN interface card?

  • A. An alarm condition
  • B. Receive signal strength
  • C. A carrier has been detected
  • D. The interface is in loopback mode

Answer: C

NEW QUESTION 19
Which of the following describes the roles of devices in a WAN? (Choose three.)

  • A. A CSU/DSU terminates a digital local loop.
  • B. A modem terminates a digital local loop.
  • C. A CSU/DSU terminates an analog local loop.
  • D. A modem terminates an analog local loop.
  • E. A router is commonly considered a DTE device.
  • F. A router is commonly considered a DCE device.

Answer: ADE

NEW QUESTION 20
When using a modem to provide out-of-band access to a Cisco router, which cable is used to connect the modem to the router?

  • A. DB-25 to RJ-45
  • B. RJ-45 to RJ-45
  • C. RJ-44 to RJ-45
  • D. DB-9 to RJ-45
  • E. DB-45 to RJ-45

Answer: A

NEW QUESTION 21
Which two pieces of information can be determined about a neighbor device from the CLI command show cdp neighbor? (Choose two)

  • A. device ID
  • B. IP address
  • C. platform
  • D. uptime

Answer: AC

NEW QUESTION 22
......

100% Valid and Newest Version 640-692 Questions & Answers shared by DumpSolutions, Get Full Dumps HERE: https://www.dumpsolutions.com/640-692-dumps/ (New 92 Q&As)