The Latest Guide To 300-620 Free Demo

Proper study guides for Up to the immediate present Cisco Implementing Cisco Application Centric Infrastructure (DCACI) certified begins with Cisco 300-620 preparation products which designed to deliver the Highest Quality 300-620 questions by making you pass the 300-620 test at your first time. Try the free 300-620 demo right now.

Check 300-620 free dumps before getting the full version:

NEW QUESTION 1
Which table holds IP address, MAC address and VXLAN/VLAN information on a Cisco ACI leaf?

  • A. endpoint
  • B. adjacency
  • C. RIB
  • D. ARP

Answer: A

Explanation:
Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739989.html

NEW QUESTION 2
Refer to the exhibit.
300-620 dumps exhibit
Which two objects are created as a result of the configuration? (Choose two.)

  • A. application profile
  • B. attachable AEP
  • C. bridge domain
  • D. endpoint group
  • E. VRF

Answer: CE

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/rest_cfg/2_1_x/b_Cisco_APIC_REST_API_Configuration_Guide/b_Cisco_APIC_REST_API_Configuration_Guide_chapter_01110.html

NEW QUESTION 3
Which new construct must a user create when configuring in-band management?

  • A. VLAN pool
  • B. management contract
  • C. management tenant
  • D. bridge domain

Answer: D

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/kb/b_KB_Configuring_Static_Management_Access.html

NEW QUESTION 4
Which type of port is used for in-band management within ACI fabric?

  • A. spine switch port
  • B. APIC console port
  • C. leaf access port
  • D. management port

Answer: C

NEW QUESTION 5
An ACI administrator notices a change in the behavior of the fabric. Which action must be taken to determine if a human intervention introduced the change?

  • A. Inspect event records in the APIC UI to see all actions performed by users.
  • B. Inspect /var/log/audit_messages on the APIC to see a record of all user actions.
  • C. Inspect audit logs in the APIC UI to see all user events.
  • D. Inspect the output of show command history in the APIC CLI.

Answer: A

NEW QUESTION 6
An engineer is extending an EPG out of the ACI fabric using static path binding. Which statement about the endpoints is true?

  • A. Endpoints must connect directly to the ACI leaf port.
  • B. External endpoints are in a different bridge domain than the endpoints in the fabric.
  • C. Endpoint learning encompasses the MAC address only.
  • D. External endpoints are in the same EPG as the directly attached endpoints.

Answer: C

NEW QUESTION 7
Which statement regarding ACI Multi-Pod and TEP pool is true?

  • A. The IP addresses used in the IPN network can overlap TEP pool of the APIC.
  • B. A different TEP pool must be assigned to each Pod.
  • C. The Pod1 TEP pool must be split and a portion of the TEP pool allocated to each Pod.
  • D. The same TEP pool is used in all Pods.

Answer: B

Explanation:
Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c11-739714.html

NEW QUESTION 8
Which action sets Layer 2 loop migration in an ACI Fabric with a Layer 2 Out configured?

  • A. Enable MCP on the ACI fabric.
  • B. Disable STP in the external network.
  • C. Disable STP on the ACI fabric.
  • D. Enable STP on the ACI fabric.

Answer: A

NEW QUESTION 9
A RADIUS user resolves its role via the Cisco AV Pair. What object does the Cisco AV Pair resolve to?

  • A. tenant
  • B. security domain
  • C. primary Cisco APIC
  • D. managed object class

Answer: D

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/Security_config/b_Cisco_APIC_Security_Configuration_Guide/b_Cisco_APIC_Security_Guide_chapter_01011.html

NEW QUESTION 10
Which setting prevents the learning of Endpoint IP addresses whose subnet does not match the bridge domain subnet?

  • A. “Limit IP learning to network” setting within the bridge domain.
  • B. “Limit IP learning to subnet” setting within the EPG.
  • C. “Limit IP learning to network” setting within the EPG.
  • D. “Limit IP learning to subnet” setting within the bridge domain.

Answer: D

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/L2_config/b_Cisco_APIC_Layer_2_Configuration_Guide/b_Cisco_APIC_Layer_2_Configuration_Guide_chapter_010.html

NEW QUESTION 11
Which description regarding the initial APIC cluster discovery process is true?

  • A. The APIC uses an internal IP address from a pool to communicate with the nodes.
  • B. Every switch is assigned a unique AV by the APIC.
  • C. The APIC discovers the IP address of the other APIC controllers by using Cisco Discovery Protocol.
  • D. The ACI fabric is discovered starting with the spine switches.

Answer: C

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/aci-fundamentals/b_ACI-Fundamentals/b_ACI-Fundamentals_chapter_010011.html

NEW QUESTION 12
A situation causes a fault to be raised on the APIC. The ACI administrator does not want that fault to be raised because it is not directly relevant to the environment. Which action should the administrator take to prevent the fault from appearing?

  • A. Under System -> Faults, right-click on the fault and select Acknowledge Fault so that acknowledged faults will immediately disappear.
  • B. Create a stats threshold policy with both rising and falling thresholds defined so that the critical severity threshold matches the squelched threshold.
  • C. Under System -> Faults, right-click on the fault and select Ignore Fault to create a fault severity assignment policy that hides the fault.
  • D. Create a new global health score policy that ignores specific faults as identified by their unique fault code.

Answer: C

NEW QUESTION 13
An engineer is creating a configuration import policy that must terminate if the imported configuration is incompatible with the existing system. Which import mode achieves this result?

  • A. merge
  • B. atomic
  • C. best effort
  • D. replace

Answer: B

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/4-x/aci-fundamentals/Cisco-ACI-Fundamentals-401/Cisco-ACI-Fundamentals-401_chapter_01011.html

NEW QUESTION 14
An engineer is extending EPG connectivity to an external network. The external network houses the Layer 3 gateway and other end hosts. Which ACI bridge domain configuration should be used?

  • A. Forwarding: CustomL2 Unknown Unicast: Hardware Proxy L3 Unknown Multicast Flooding: Flood Multi Destination Flooding: Flood in BD ARP Flooding: Enabled
  • B. Forwarding: Custom L2 Unknown Unicast: FloodL3 Unknown Multicast Flooding: Flood Multi Destination Flooding: Flood in BD ARP Flooding: Enabled
  • C. Forwarding: CustomL2 Unknown Unicast: Hardware Proxy L3 Unknown Multicast Flooding: Flood Multi Destination Flooding: Flood in BD ARP Flooding: Disabled
  • D. Forwarding: Custom L2 Unknown Unicast: FloodL3 Unknown Multicast Flooding: Flood Multi Destination Flooding: Flood in BD ARP Flooding: Disabled

Answer: D

NEW QUESTION 15
Refer to the exhibit.
300-620 dumps exhibit
An engineer is integrating a VMware vCenter with Cisco ACI VMM domain configuration. ACI creates port-group names with the format of “Tenant | Application | EPG”. Which configuration option is used to generate port groups with names formatted as “Tenant=Application=EPG”?

  • A. enable tag collection
  • B. security domains
  • C. delimiter
  • D. virtual switch name

Answer: D

NEW QUESTION 16
What must be enabled in the bridge domain to have the endpoint table learn the IP addresses of endpoints?

  • A. L2 unknown unicast: flood
  • B. GARP based detection
  • C. unicast routing
  • D. subnet scope

Answer: C

Explanation:
Reference: https://hsvglobalschool.in/dhkycw/cisco-aci-bridge-domain.html

NEW QUESTION 17
Which two dynamic routing protocols are supported when using Cisco ACI to connect to an external Layer 3 network? (Choose two.)

  • A. iBGP
  • B. VXLAN
  • C. IS-IS
  • D. RIPv2
  • E. eBGP

Answer: AE

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_010010.html

NEW QUESTION 18
In the context of VMM, which protocol between ACI leaf and compute hosts ensures that the policies are pushed to the leaf switches for immediate and on demand resolution immediacy?

  • A. VXLAN
  • B. LLDP
  • C. ISIS
  • D. STP

Answer: A

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_0101.html

NEW QUESTION 19
When Cisco ACI connects to an outside Layers 2 network, where does the ACI fabric flood the STP BPDU frame?

  • A. within the bridge domain
  • B. within the APIC
  • C. within the access encap VLAN
  • D. between all the spine and leaf switches

Answer: A

Explanation:
Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/white-paper-c07-732033.html#_Toc395143571

NEW QUESTION 20
Which attribute should be configured for each user to enable RADIUS for external authentication in Cisco ACI?

  • A. cisco-security domain
  • B. cisco-auth-features
  • C. cisco-aci-role
  • D. cisco-av-pair

Answer: D

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/Security_config/b_Cisco_APIC_Security_Configuration_Guide/b_Cisco_APIC_Security_Guide_chapter_01011.html

NEW QUESTION 21
An engineer is implementing a Cisco ACI data center network that includes Cisco Nexus 2000 Series 10G fabric extenders. Which physical topology is supported?
A.
300-620 dumps exhibit
B.
300-620 dumps exhibit
C.
300-620 dumps exhibit

  • A. 300-620 dumps exhibit

Answer: D

NEW QUESTION 22
Which two protocols support accessing backup files on a remote location from the APIC? (Choose two.)

  • A. TFTP
  • B. FTP
  • C. SFTP
  • D. SMB
  • E. HTTPS

Answer: BC

Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/troubleshooting/b_APIC_Troubleshooting/b_APIC_Troubleshooting_appendix_010011.html

NEW QUESTION 23
Refer to the exhibit.
300-620 dumps exhibit
Which Adjacency Type value should be set when the client endpoint and the service node interface are in a different subnet?

  • A. Routed
  • B. Unicast
  • C. L3Out
  • D. L3

Answer: D

NEW QUESTION 24
......

P.S. Easily pass 300-620 Exam with 0 Q&As Dumpscollection.com Dumps & pdf Version, Welcome to Download the Newest Dumpscollection.com 300-620 Dumps: https://www.dumpscollection.net/dumps/300-620/ (0 New Questions)