High value 1z0-1001 Exam Dumps 2021

NEW QUESTION 1
What flow is depicted in the diagram below?

• A. Drop Ship
• B. Back-to-back
• C. Configure to order
• D. Consignment order
• E. Internal Transfer

Answer: A

NEW QUESTION 2
Which step must be performed before enabling a new inventory organization in SCM cloud for collection from Manage Upstream and Downstream Source System Task?

• A. Add the Organization against the OPS destination system.
• B. Add the Organization against the OPS source system manually.
• C. Refresh the Organization List against the Oracle Planning and Sourcing (OPS) source system.
• D. Create a new source system for each organizatio

Answer: C

Explanation: https://docs.oracle.com/en/cloud/saas/supply-chain-management/r13- update17d/faivc/implementing-planning-source-systems-and-profile-options.html#FAIVC134911

NEW QUESTION 3
Which change mode takes a snapshot at the stages mentioned below: When the orchestration process starts
When a change order is received at an orchestration process step

• A. Incremental
• B. Simple
• C. None
• D. Advanced

Answer: D

Explanation: http://www.oracle.com/technetwork/fusion-apps/orderorchestrationguide-e22707-01-1514572.pdf

NEW QUESTION 4
Your customer is concerned about not having access to schedule orders and check availability when the Global Order Promising server is down. Which two statements are true? (Choose two.)

• A. Affected orders can be rescheduled based on supply chain availability search after server recovery.
• B. Global Order Promising continues promising orders based on supply chain availability search until the server or backup server can be restarted.
• C. Global Order Promising cannot continue promising orders, but the server or backup server is usually restarted quickly.
• D. Affected orders cannot be rescheduled based on supply chain availability search after serverrecovery.
• E. Global Order Promising continues promising orders based on lead-time availability until the server or backup server can be restarted.

Answer: AB

NEW QUESTION 5
Your customer would like automatic e-mail notifications to be sent for specific business events. On the Manage Business Event Trigger Points page, which business event trigger points can be used to enable e-mail notifications?

• A. Order header status update and order attribute update
• B. Order header status update and hold
• C. Order attribute update and hold
• D. Change order compensation complete and hold
• E. Hold and split

Answer: D

NEW QUESTION 6
Which Oracle Transactional Business Intelligence subject area should you use to build an online custom port that shows the number of orchestration orders for a selected orchestration process status?

• A. Distributed Order Orchestration – Order Lines Real Time
• B. Distributed Order Orchestration – Fulfillment Lines Real Time
• C. Distributed Order Orchestration – Process Instances Real Time
• D. Distributed Order Orchestration – Process Instances

Answer: C

NEW QUESTION 7
Your customer requires order revisions from an external system. The customer is concerned that all order lines will have to be sent again in the revised order even though the customer typically changes only one or two lines. Which three statements are true? (Choose three.)

• A. Order lines can be canceled by sending a cancellation request.
• B. A revised order can contain just the updated order line.
• C. All order lines will have to be sent again in the revised order.
• D. Missing order lines are assumed to be canceled.
• E. Missing order lines are not assumed to be cancele

Answer: ABD

NEW QUESTION 8
Which two statements describe Net Change Collection? (Choose two.)

• A. Data for the selected entities is replaced in the planning data repository.
• B. It completely refreshes the planning data repository.
• C. Data for the selected entities is deleted from the planning data repository.
• D. It collects only changed data to the planning data repository.
• E. It collects data only incrementally to the planning data repositor

Answer: BE

NEW QUESTION 9
Available to promise rules are .

• A. Seeded using APICS conventions
• B. User defined in order management module
• C. User defined using a matrix of selectable criteria
• D. User defined in the global order promising module
• E. System assigned base upon the item type, cumulative lead time and un consumed forecast

Answer: C

NEW QUESTION 10
Identify the transformation type in which a transactional item attribute is used for transforming a product. The transformation may be added to the existing product or replace the product on the sales order for a CTO item.

• A. Attribute to Product
• B. Product to Product
• C. Context to Product
• D. Attribute to Attribute

Answer: A

Explanation: An attribute-to-product transformation uses transactional attributes to transform an attribute to an
item number. It can add the transformation to an existing item or replace the item that the source order references. Assume your company receives orders for an MP3 player that includes a Color attribute and a Size attribute, and that you must use a combination of these attributes to reference an item number. In the following example, a transformation rule transforms the Color and Size
attributes of the Mini Plus item to the VIS481 item. Order Management displays VIS481 on the order line.

NEW QUESTION 11
The customer service representative in your company has received a request from a customer for appending additional quantity to an original sales order that has already been released to the warehouse. The sales order quantity revision has resulted in a new shipment line with the statue “Ready to Release.”
What action would you take to ship the new line by merging it with the original shipment?

• A. Run the process Create Shipments with the parameter Append Shipment set to Yes.
• B. Perform Pick Release by selecting the Append Shipment check box.
• C. Manually append the new line to the shipment.
• D. Run the process Create Shipments with the parameter Create Shipment set to Ye

Answer: C

NEW QUESTION 12
Your company, which is a global major in farming equipment, has products ranging from make-tostock fast moving items, assembled-on-demand items, and complex configurable items with
manufacturing plants and distribution centers spread across the US, Europe, and Chin

• A. The company is deploying Oracle Cloud Order Management, and wants to evaluate the different promising modes that are possible through cloud Global Order Promising for its products.Which three promising modes are possible through GOP for the company’s products? (Choose three.)
• B. lead times
• C. infinite availability
• D. global availability
• E. zone-based availability
• F. supply chain availability

Answer: ABE

Explanation: https://docs.oracle.com/en/clouHYPERLINK "https://docs.oracle.com/en/cloud/saas/supply-chainmanagement/r13-update17d/fascp/manage-order-promisingrules.
html#FASCP1127104"d/saas/supply-chain-management/r13-update17d/fascp/manage-orderpromising- rules.html#FASCP1127104
ATP Rule Promising Modes: Explained
The promising mode of an available-to-promise (ATP) rule determines which set of attributes the order promising logic evaluates when determining ATP results. When creating an ATP rule on the Manage ATP Rules page, the first thing that you must specify is which of the three promising modes is applicable to the ATP rule.
These are the three promising modes: Supply chain availability search Lead time based
Infinite availability based

NEW QUESTION 13
Your company is a manufacturer and distributor of CTO type of products globally, and uses Global Order Promising to promise its orders. You recently noticed that the promising results are determining the expected sources globally but not the least-cost ones. You want to understand the logic used by the GOP engine to derive the least-cost source.
Identify the four cost elements used by the cloud Global Order Promising engine to achieve the Profitable-to-Promise objective? (Choose four.)

• A. Cost of internal transfers between organizations
• B. Storage Cost (when the cost of holding that item in inventory is high)
• C. Overhead Cost
• D. Resource Consumption Cost (in case the end item is to be manufactured)
• E. Component Cost
• F. Standard Cost at internal organizations

Answer: ADEF

NEW QUESTION 14
The orchestration process fulfillment task is performed by an external system and you need to register the connector to integrate the non-Fusion system.
Which two steps would you perform to invoke the external connector service endpoint URL? (Choose two.)

• A. Create a new web service connector to register the endpoint URL.
• B. Create a new fulfillment task service to register the endpoint URL.
• C. Create a new routing rule for the fulfillment task to call the endpoint URL.
• D. Create a new routing rule for the fulfillment task to call the connecto

Answer: AD

Explanation:
https://docs.oracle.com/cd/E25054_01/fusionapps.1111/e20386/F476421AN2E51E.htm

NEW QUESTION 15
You are implementing the entire suite of Supply Chain Management Cloud for an auto component manufacturing and distribution company. This company has a manufacturing facility where different auto electrical components are produced to fulfill the demand that originates from various customers. One of the components that the company sells to its customers requires specialized operations; therefore, the company outsources it to an external manufacturer instead of producing it in its own facility.
Which two steps are required to fulfill the demand for this component through outsourced manufacturing? (Choose two.)

• A. Define this component as an Item with the “Contract Manufacturing” field enabled and the "Make or Buy" attribute set to “Buy.”
• B. Define this component as an Item with the “Contract Manufacturing” field enabled and the “Make or Buy” attribute set to “Make.”
• C. Select the Customer Sales Order Fulfillment check box under the Procurement offering.
• D. Create a sourcing rule of the Buy type for this component in the selling inventory organization.
• E. Model the manufacturer to which the component production is outsourced as a Supplier in the enterprise.
• F. Create a sourcing rule of the Make type for this component in the selling inventory organizatio

Answer: BE

Explanation: https://docs.oracle.com/cloud/r13_update17c/scmcs_gs/FAIMS/FAIMS1823005.htm#FAIMS1922710

NEW QUESTION 16
A global Power Systems manufacturer sells Uninterrupted Power Supply (UPS) products through its online portal. To gain competitive advantage, the manufacturer wants to enhance the ability of buyers to select a desired configuration of the high-end UPS models through guided selling options on its online selling portal. The company’s product development team has finalized the enhancements, and needs your help to get them implemented on their online selling portal that is supported by Oracle Cloud Configurator.
What four actions would you take in Oracle Cloud Configurator to enhance a buyer’s experience? (Choose four.)

• A. You can allow buyers to raise requests if an expected product functionality is not offered.
• B. You can create enhancements to the model structure that supplements the imported configurable structure of a model item.
• C. You can create rules that will guide users in creating a valid model.
• D. You can create user interfaces that will be dynamically presented to users based on the options chosen in the Configurator model.
• E. You can test the behavior of the configured model anytime when you are editing it.
• F. You can enable a checkout option for a model when a valid configuration is finalized.
• G. You can display product reviews of customers who have purchased the same configuration earlie

Answer: BDFG

NEW QUESTION 17
Your company is importing orders from an e-commerce system where a sales order is created for a laptop. The ship-to-site of the customer determines the type of power cord to be shipped along with the laptop.
How will you enrich the sales order during import to append the item number corresponding to the particular model of the power cord?

• A. Create an External Interface Routing Rule.
• B. Create a Compensation Pattern Rule.
• C. Create a Pre Transformation Rule.
• D. Create a Post Transformation Rule.
• E. Create a Product Transformation Rul

Answer: E

NEW QUESTION 18
Which three attributes in the orchestration process definition utilize Oracle business rules to make runtime decisions for process behavior? (Choose three.)

• A. Cost of Change
• B. Exit Criteria
• C. Line Selection Criteria
• D. Start After conditions
• E. Evaluation Sequence

Answer: BCD

Explanation: https://docs.oracle.com/en/cloud/saas/supply-chain-management/r13-update17d/faiom/settingup- orchestration-processes.html#FAIOM211469