Citrix 1Y0-230 Braindumps 2021

NEW QUESTION 1
Where should a Citrix Administrator configure SmartControl restrictions?

• A. NetScaler Gateway
• B. XenDesktop Delivery Controller
• C. NetScaler Gateway, XenDesktop Delivery Controller and StoreFront
• D. StoreFront and XenDesktop Delivery Controller

Answer: A

NEW QUESTION 2
Scenario: A Citrix Administrator needs to add 10 new servers to an existing server farm. The new servers are configured to serve the same applications and connections and are twice the capacity of the existing servers. The administrator wants to ensure that they are being fully utilized. Currently in the environment, the default load-balancing method is being used.
To ensure that only the 10 new servers are receiving twice the connections of the old servers without changing the load balancing to the rest of the environment, the administrator needs to add a weight of to the services attached to the servers. (Choose the correct option to complete the sentence.)

• A. 2; new
• B. 2; old
• C. 50; old
• D. 50; new

Answer: B

NEW QUESTION 3
Scenario: A Citrix Administrator has made changes to the NetScaler, deleting parts of the configuration, and then saved the new configurations. The changes caused an outage which needs to be resolved as quickly as possible. There is no NetScaler backup.
What does the administrator need to do to recover the configuration quickly?

• A. Restart the NetScaler
• B. Run Save v/s Running configuration
• C. Restore from revision history
• D. Run HA file synchronization

Answer: D

NEW QUESTION 4
Scenario: A Citrix Administrator found that whenever a NetScaler VPX high availability (HA) pair of
appliances fails over, the load-balanced websites are NOT accessible. The administrator investigated the issue and found that the router and switches do NOT support gratuitous ARP (GARP). However, the administrator cannot immediately afford to upgrade the network infrastructure.
What can the administrator do immediately to resolve the issue and prevent a future outage?

• A. Migrate the VPX pair to different hypervisor hosts.
• B. Replace the NetScaler VPX appliances with NetScaler MPX appliances
• C. Configure a Virtual MAC (VMAC) on the NetScaler.
• D. Utilize IPv6 instead of IPv4.

Answer: D

NEW QUESTION 5
Scenario: A Citrix Administrator entered the command-line interface commands below to prevent IP address 10.10.100 from accessing the NetScaler on port 80.
add simpleacl rule1 DENY- srcIP 10.10.10.100 –TTL 600 add simpleacl rule2 DENY- srcIP 10.10.10.100 –destPort 80 add ns acl rule1 DENY- srcIP 10.10.10.100-priority 10
add ns acl rule2 DENY- srcIP 10.10.10.100-priority 100 apply ns acls
Which Access Control List (ACL) will the NetScaler use to deny the IP address?

• A. add ns acl rule1 DENY-srcIP 10.10.10.100-priority 10
• B. add simpleacl rule1 DENY- srcIP 10.10.10.100 –TTL 600
• C. add simpleacl rule2 DENY- srcIP 10.10.10.100 –destPort 80
• D. add ns acl rule2 DENY- srcIP 10.10.10.100-priority 100

Answer: B

NEW QUESTION 6
Which two features can a Citrix Administrator use to allow secure access to a sensitive company web server that is load-balanced by the NetScaler? (Choose two.)

• A. ICA proxy
• B. Integrated caching
• C. Application Firewall
• D. AppFlow
• E. AAA

Answer: AC

NEW QUESTION 7
A Citrix Administrator needs to utilize the client IP Address as the resource IP address for the NetScaler to server connections.
Which mode on the NetScaler will the administrator utilize to meet this requirement?

• A. Layer2
• B. USIP
• C. Layer 3
• D. USNIP

Answer: B

NEW QUESTION 8
Scenario: A Citrix Administrator of a Linux environment needs to load-balance the web servers in an environment. However, due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator do to load-balance the web servers in this scenario?

• A. Install a NetScaler CPX.
• B. Purchase NetScaler MPX.
• C. Purchase a NetScaler SDX.
• D. Install NetScaler VPX.

Answer: A

NEW QUESTION 9
Scenario: A Citrix Administrator was notified that all contractor user IDs will start with the prefix “con.” Currently SmartControl is used to restrict access to peripherals.
Which expression can the administrator use to accomplish this requirement?

• A. HTTP.REQ.USERNAME.CONTAINS(“con”).NOT
• B. HTTP.REQ.USER.IS_MEMBER_OF(“con”).NOT
• C. HTTP.REQ.USE
• D. IS_MEMBER-OF (“con”)
• E. HTTP.REQ.USERNAME.CONTAINS (“con”)

Answer: C

Explanation: Reference https://support.citrix.com/article/CTX200261

NEW QUESTION 10
Scenario: A Citrix Administrator manages an environment that has an externally accessible website. The administrator would like to provide end-to-end encryption and use features such as caching and compression on the NetScaler.
Which setting in SSL offload should the administrator configure to meet this requirement?

• A. SSL_TCP front-end, TCP back-end
• B. SSL front-end, HTTP back-end
• C. SSL_TCP front-end, SSL_TCP back-end
• D. SSL front-end, SSL back-end

Answer: C

NEW QUESTION 11
Scenario: A Citrix Administrator is running applications on thousands of load-balanced back-end servers in a large infrastructure. It is difficult to track and troubleshoot problems due to the large volume of traffic received.
Which feature of NetScaler Management and Analytics System (MAS) can the administrator configure to monitor and troubleshoot in detail for an environment of this size?

• A. AppFlow Analytics
• B. Application Security Analytics
• C. Application Performance Analytics
• D. Advanced Analytics with Telemetry Node installed

Answer: D

NEW QUESTION 12
In an environment which requires secure user access, a Citrix Administrator configures Authentication, Authorization and Auditing (AAA) to redirect a user to the logon page.
Which four steps are required to complete the authentication process? (Choose four.)

• A. Configure a syslog server to capture invalid logon attempts?
• B. Verify that the user is authorized to access specific intranet content
• C. Collect the user’s credentials to cache them in a directory that is accessible through LDAP
• D. Log the user accesses, including invalid login attempts, in an audit log
• E. Create a load-balancing virtual server to redirect for secure access
• F. Maintain a session timeout, after which users must authenticate again to regain access to the intranet
• G. Apply specified two-factor authentication method

Answer: CEFG

NEW QUESTION 13
Which scenario will cause automatic high availability (HA) synchronization to fail?

• A. Different build versions
• B. A configuration change to the primary NetScaler
• C. A force failover
• D. Manually forced synchronization

Answer: B

NEW QUESTION 14
How can a Cirtix Administrator configure session policies for the Authentication, Authorization and Auditing Traffic Management (AAA-TM) sessions if the authentication virtual server is specified in a Unified Gateway setup?

• A. The session policies can be defined only for the NetScaler Gateway virtual server.
• B. The AAA-TM session policies are bound to the virtual server.
• C. The AAA-TM sessions inherit the NetScaler Gateway session policies.
• D. The AAA-TM policies need to be bound as default global.

Answer: B

NEW QUESTION 15
Scenario: A NetScaler MPX appliance has become unresponsive while using the GUI. A Citrix Administrator needs to restart the appliance and force a core dump for analysis.
What can the administrator do to accomplish this?

• A. Use the NMI button on the back of the appliance.
• B. Connect to the USB port to issue a restart command.
• C. Use the reset button on the front of the appliance.
• D. Turn off the appliance using the power button.

Answer: A

NEW QUESTION 16
Scenario: A Citrix Administrator configured SNMP to send traps to an external SNMP system. When reviewing the messages, the administrator noticed several entity UP and entity DOWN messages.
To what are these messages related?

• A. High availability synchronization
• B. Load balancing virtual servers
• C. High availability heartbeats
• D. Network interface

Answer: B

NEW QUESTION 17
TCP multiplexing is a technique that enables the reuse of existing TCP connections
Which NetScaler hardware or software platform offers a Multi-Tenant solution?

• A. VPX
• B. CPX
• C. MPX
• D. SDX

Answer: D